Quote:
Originally Posted by xpl0sive
finally put the car back together, filled with coolant... ran the bleed procedure, let it run for about 15 mins. started the car, everything seemed file, let it warm up and got the "coolant level low" warning. let the car cool down, checked the coolant in the tank, it was reading full. ran the bleed procedure again, started the car again, same issue. whats the deal? did the level sensor fail all of a sudden?
|
Try few more times, and top it a little over the max. There may be a bubble in the system. Possibly leave the pump on for a good bit longer.