View Single Post
  #21  
Old 01-25-2015, 04:45 AM
j_lopez j_lopez is offline
Member
 
Join Date: May 2014
Location: Winnipeg
Posts: 19
j_lopez is on a distinguished road
Update on no crank no start

Okay, after reading about my situation I came across these guy RPM motors here canada and I called them to order and basically check if my keys are shot or my EWS. The guy from the help line told me to do this.

1. Locate EWS then pull out the wire that connects to it.
2. In the wire harness that came out there are two big wire that is in there and good enough the harness allows a blade fuse to be inserted.
3. Inserted a 30A fuse then tried turning the key in the hopes that it will at least crank.

**********

The result,the ENGINE CRANKED!!!!!!!! but it did not start fully (At least we are going somewhere) Called Zach of RPM motors and advised me that most likely about 90% its either the key or the EWS. So toady I have sent them my EWS and my DME and a Key to zero-in where the problem is. I'll check back with the developments.

Also can sombody advisee me how to add photos here so I might be able to share the pictures. Thanks
Reply With Quote

Sponsored Links