Quote:
Originally Posted by Dave A
Thanks for that. I may well give it a go...! If it causes a failure I'll report back but fingers crossed it won't. Parts and labour are very pricey here in Switzerland...
|
Let me know how it goes with the install.
I used INPA to diagnosis the Parking Brake Malfunction problem and it gave me an error code of 6023 Power Supply. I did some searching and it's possible that the pins on the electrical connectors of the EMF control module is burnt caused by a bad low voltage battery. I have replaced the battery, but haven't had time to check the connector.
I'm almost positive the problem was caused by the battery and NOT the new AutoHold switch.