I did some digging over night and found some documents with some numbers in them :


Max pressure the compressor can make is 300psi
Operating EHC2 pressure is 225psi with an allowance of 10psi above or below that.


I checked mine for cold this morning and the vehicle was pretty even and had 200psi in the tank before starting.
Started it up, let it self level, raised it, lowered it etc and max pressure I could get was 200psi with the compressor at 78degrees.


Going by those numbers that I found im no too far off however it may be the time its taking to make that pressure !


Next step is to rebuild the compressor and check for leaks. Then I will know if the system is air tight and I may find damage inside the compressor etc