Quote:
Originally Posted by talljames
Heh guys, I am having the same window issue at sporadic different times. It will not go down until I open the door. just a quick question. The board is located inside the master switch? I am going to pop out the switch from the door and disconnect it. But my question is: Does the switch come apart easily or do you have to break some plastic/metal rivets?
cheers
|
It unclips with no drama but unless you are good with electronics, there's not much you can do in there - beyond confirming it's clean or corroded.
Most likely reason for your fault is a broken wire in the rubber boot in the door hinge area but it's still worth looking at the switch module - just in case - and it's easier to get at!!
Don't unplug the door loom in the hinge area without disconnecting the battery - otherwise you'll set an SRS (airbag) fault....