View Single Post
  #24  
Old 11-14-2020, 10:00 AM
c-bass c-bass is offline
Member
 
Join Date: Nov 2018
Location: Canada
Posts: 634
c-bass is on a distinguished road
Quote:
Originally Posted by andrewwynn View Post
What are you using for the bushing? I've seen good things with windshield adhesive.

Great job spent the right time to prep and broke nothing.

I just changed a front bearing and two things didnt want to play nice:

The Brake caliper bolts were seized to the point my high impact M18 wasn't knocking them loose. I didn't want to split my 16mm socket or snap off the bolt heads and if I can I don't use penetrating oil near brake parts. I ended up getting them loose with old timer impact: breaker bar and 4# hammer. Took 3-4 solid whacks but both finally broke free.

Then, for the first time in 9 or 10 times removing axle from hub it just refused to move. 5# slide hammer did nothing 4# mini sledge nothing. Finally used the spider from the hub removal tool, loosened up the lugs, snugged up the center rod on the spider and drove the lugs back in to pull the spider to the hub. That will generate more force than the 5/8 push rod is capable of so thankfully it took less force.
What's the spider?
Reply With Quote

Sponsored Links