Quote:
Originally Posted by andrewwynn
26207508629
Drive shaft assy front
L=774MM
That's what realoem has for my part number. I'm pretty confident I saw a different part with a different length but the "supersedes" part has the same length so overall length might not change just how far it goes Intp the TC.
Somebody sells a spacer that goes on the guibo to push the spline into the TC but I think there is a stop for a seal on the shaft so not sure how that would work.
If my shafts ever start to slip I would modify the end so it can go in farther and add the spacer vs. replace the shaft (I don't have welding capacity or I'd get the fixed end)
|
I just checked realOEM using an '03 4.6IS. Same part number (26207508629) and length (774mm).
I also purchased the spacer from a vendor in Russia (via ebay) that another user posted about recently (separate thread) - I think that's the one you are referring to.
I agree with the question of seal, and also consider the question on needing longer bolts. I'll post up the results. May not happen before spring.