Quote:
Originally Posted by Fifty150hs
Update: went through my entire suspension system and checked torque on everything. Everything was to spec. The driver's side coilover preload was loose, so I went and re-preloaded the front coil overs. Checked my front drive shaft flex disk. It's almost new and looks to be in good shape. Checked the shaft to see if I could get it to move around side to side and it doesn't. I checked the movement on the front dif by rotating from resistance to resistance. It was about 9mm of slop. Anyone know what the lash spec is supposed to be? I couldn't find it. Also, anyone know what size allen wrench is needed for the fill and drain plugs?
|
Clarifying, the 9mm was measured at the outer edge of one of the bolts holding the front shaft to the diff.