View Single Post
Old 03-07-2021, 09:36 PM
bagpype bagpype is offline
Join Date: Mar 2012
Location: atlanta,GA
Posts: 187
bagpype is on a distinguished road
Originally Posted by crystalworks View Post
^ What he said.

Can you post your original ZCS strings and your modified one? Also, when writing the new ZCS, don't do the whole truck. Only the modules which store the ZCS. For the E53 I think that's the EWS and KOMBI (cluster). After you successfully code those two, the EHCII module should disappear.

Then, since you have a 4.8 you will have to code the DSC to think it's in a 4.4i N62 using NCSdummy or you will have a dsc error and light on the dash.
I am going into NCSEXPERT >DATEN>E53 and I am opening the E53ZST.000 file and I am erasing the line that reads
";0221 0000000400000000 LFEDER_2_ACHS //2-axle-LVL/CTL/SYS //2-Achs-Niveauregulierung"
I saved it as E53ZST.000
I went to NCSExpert loaded the vehicle, erased the last digit from GM, SA, and VN, checked the check box for Calculate Checksum then pressed "OK"

I went back and and wrote (scheiben) the ZCS to EWS and KMBI
I go back and try "code car" and I get a 'Nicht Antworten' (No Answer) error on the EHCII module. (Thank god I understand German). What am I doing wrong that the EHC module is still present?
2006 x5 4.4
Reply With Quote

Sponsored Links