View Single Post
  #20  
Old 07-15-2021, 01:11 AM
Bmwe5320023.0 Bmwe5320023.0 is offline
Member
 
Join Date: Jan 2020
Location: Calgary
Posts: 872
Bmwe5320023.0 is on a distinguished road
Lol what's going on with all this arguing
People saying remote starter is bad, come on lol
Remote starter will be excellent, especially for me with -40 Celsius and colder in the winter. I want to get into a warm car

So here we go. I deleted EWS, no need for it.

Just trying to figure out some wiring stuff



I need to identify the wires on the ignition switch.
Total 11 pins

Any help is welcome

Pin 1 - empty on 6 cylinder, which is the case for me.

Pin 2 purple black wire - accessories? On the diagram goes to pin 5 of connector X10459. I couldn't find pinout for connector X10459. What is pin 5?

Pin 3 - empty
Pin 4 - empty

Pin 5 red wire - constant 12 v power fuse 105
(80A) Immobilizer, ignition switch-4,4/4,6 (^02/02)

Pin 6 red wire - constant 12 v power fuse 106
(50A) Ignition switch, lamps control module

Pin 7 red and white wire - Fuse F3
What is fuse f3?
5 amps →02.2001: Output Stage - Rear Compartment Blower
7.5 amps 03.2001→: Ignition Switch
Well my car is 2002. Not sure what does ignition switch mean here?
Is this another 12 volt constant power or what?

Pin 8 black and yellow wire - DME and EWS. Pretty sure it goes to starter

Pin 9 green wire - goes into fusebox. Not sure what if is. Maybe ignition?



Pin 10 purple and white - output stage, which I guess means the resistor for the rear blower. Not sure why it goes to the ignition but it does.

Pin 11 not used.

Feel free to jump in
Reply With Quote

Sponsored Links