View Single Post
  #1  
Old 06-17-2007, 11:51 PM
detailersdomain's Avatar
detailersdomain detailersdomain is offline
Vendor
 
Join Date: Dec 2005
Location: NJ
Posts: 1,882
detailersdomain is on a distinguished road
X5world's very own Michelle's X5 full detail!

Okay I got to meet 3 X5world members now and all of you are great! (Michelle, Eugene, and Jeff) I hope to continuing meeting and speaking to all of you.

Basically I got Michelle's X5 at about 4 on Friday, she drove in from MD to go to the get together in CT. I'm not gonna say much the pictures are going to do the talking but here are the steps.

1.Wash car with Adam's Car Wash and FoamGun
2. clayed car with Adam's Clay Bar and Adam's Detail Spray as a lube
3. polished out with Menzerna SIP with a Metabo
4. final polish with Menzerna 106FF with a Metabo
5. applied Lusso Oro for that wet finish
(note due to time we would have love to spend more time polishing out the car with SIP or even PowerGloss Compound however we could not on this visit.)
6. cleaned the window with Adam's Glass Cleaner
7. Dressed tires with Adam's VRT
8. Dressed black trim with Adam's In and Out and Adam's VRT
9. Dressed the wheel wells with Adam's Undercarriage Spray
10. Final wipe down with Adam's Detail Spray

Engine cleaning was done after the wheels, as the engine was still warm
1. Rinsed down the engine
2. Sprayed some P21S Autowash on the engine
3. Brushed the dirt and grime off the engine with a boar's hair brush
4. Sprayed down engine to rinse the P21S off
5. Closed the hood and started up the car. Run the engine for a few minutes.
6. After claying the car came back to the engine to dressed it with Adam's In and out and wiped down the excess with a detailing sponge. Finished with the engine.

Interior:
1. Wiped interior downwith 1Z Plastik (plastic cleaner amazing check the review) followed by 1Z Cockpit.
2. Vacuumed the mats, carpet, etc.
3. Wiped down and scrubbed the leather with Leather Master Strong and then conditioned with Leather Master Protectant. (typically we would use Adam's or 1Z Einszett but this one was so bad we have to use something much stronger)
4. Cleaned the glass with Adam's Glass Cleaner
5. Wiped down the jambs with 1Z einszett detail spray.
6. Went over the dash with some Adam's VRT since we wanted to bring some color back into the dash.

Okay here are the pictures.

Fender before (after wash) again would love to spend more time on it but really needed more time:

after Menzerna SIP:

after Menzerna 106FF

after polishing with a coat of Lusso:


Engine before:

Engine after: (thanks for pics Michelle)


Interior:

Before Door panel:

After Door panel:


Cockpit area before:


Cockpit area after:


Shifter area before:

Shifter area after:


Various after shots for the interior:




Before shots (unfortunately we were unable to take good before shots)



after shots: (these pics are from Michelle it was way to dark to take after shots, Michelle was cool enough to get me some pics of her baby, thanks!)


__________________
Philip Yiu
Detailer's Domain
[email protected]
tel: 201-233-0003
www.detailersdomain.com
promo code is BMW for 10% off
Reply With Quote

Sponsored Links