Some tips on doing it.
Take of the assembly that holds the cabin filter its only held on by 2 13mm bolts.
VC cover held on by 10 MM bolts. you will reuse those, the kit will come with the new rubbers.
Careful not to lose the metal washers.
When you put the new VCG on the VC use some RTB around the edges of the half cirlce dips and such.
Tighten the bolts carefully it might crack the VC if not careful. Start with Center and go opposites. The bolts are designed to stop at bottom so as soon as it stops take another small turn and leave it.
|