Phewwww!!! 3 days of work on this thing. So, lets go down the line and list what was done.
Exterior:
Wheels Prepped and cleaned with Sonax Full FX and Adams APC
Body washed and dried
Paint prepped with Aquartz Iron Cut. Lots of Contaminantes on the paint.
Rinsed then Clayed
Swirls were everywhere. So I used Mezerna SI for correction.
Then hit it with Mezerna SF to blend everything in.
Applied Aquartz Titanium
Then 6 coats of GlanzWax
Wheels pulled and sprayed with Wolfs Decon Gel
Old adhesive from wheel weights removed with 3m Adhesive remover.
Clayed all wheels
2 coats of wax on each wheel
Wheel wells cleaned with Adams APC and dressed with Adams Undercarriage Spray
Interior:
Vacummed and rubber mats washed with Adams APC
Leather cleaned with Z1 Deep Plastic Cleaner
Applied Zymol Conditioner to Leather.
I am thoroughly tired! haha. But I think it came out great. First time I used my Porter DA on it and my shoulder doesn't hurt. So the results were great and hitting the paint with the light, all swirls are GONE! Reading Phil's page (Detailersdomain) He found out if you used the glanzwax on Metallic paint, it makes the metal flakes pop. Using it in multiple coats, gives the paint this killer WET look and I agree. After the 6th coat though, I noticed it didn't look any different than after the fifth, so I stopped. Hope you guys like.
Enjoy the pics.
