Quote:
Originally Posted by silicabello
I meant more which ones are the existing +12v/ve and did he just just plug the jumpers in to the nodes, or splice them etc
TIP: I simply used a small jumper wire and used the existing +12V and –ve available on the big black connector to pulse the actuator.
|
Hi Silicabello, apologies for not responding. I had subscribed to this thread but did not receive the last few replies for some reason. It was only when I logge don did I see these responses. Nonetheless let me answer your question;
On the larger ("big") black connector I simply checked (using a multimeter) for a +12v/ -ve node as you call it. simply pushed a wire into these nodes (female plug on black connector).
On the white connector (feeding the actuator motors) i did make a small splice which I then taped up with insulation tape once done.
I hope this helps you, you are welconme to PM me if you need more detail.
Apologies for the pics, but i tried my best and not too clued up on how to load pics.