|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#11
|
||||
|
||||
__________________
2013 BMW X6M-current 2013 Audi S4-current 2007 BMW X5 4.8i (E70)-sold |
Sponsored Links | |
|
#12
|
||||
|
||||
I found a set of EBC Yellowstuff pads that I am going to try. They should be here in a couple of weeks and I will report back after some track usage.
__________________
_________________________________________________ 2010 X5M /// R63 AMG...Wifey's 540HP Family Hualer 2001 X5 3.0i Sport 335,448 miles & counting... SMG M3 Steering wheel E46 Stainless Racing Headers 4.6is Exhaust Turner Pulleys Afe Intake Brembo drilled rotors PowerFlex Bushings Hualingan 30mm H&R Spacers rear 20mm H&R Spacers front Bavarian Autosport High-Performance Coils Active Autowerke's Performance Software |
#13
|
|||
|
|||
Any reports on these??
__________________
Jon
2010 Silverstone Metallic X5 ///M |
#14
|
|||
|
|||
I was having squealing problems with the Posi-quiet - they sent me another set and I noticed it came with new locating pins, springs and an extra shim on each pad
these are the fronts I will let you know - I have been content with the stopping, no fade, good feel...and less dust. The downside to the less/type of dust - Sonax doesn't really clean it - so when the wheels are dirty you HAVE to use a brush to agitate the dried on mess Let me know about those EBC pads
__________________
/_________\ OO=[][]=OO |
#15
|
|||
|
|||
Those EBC part numbers are not for X5M and X6M
__________________
/_________\ OO=[][]=OO |
#16
|
|||
|
|||
Good to know Stu. I downloaded the EBC catalog last night and was looking at their part numbers. They state that they have rotors and pads (Yellow and Red) for the M, but when I tried to add the rotors to my order, it wouldn't let me... Only showed fitments for the pre-facelift models... (30i, 48i)
Soo, still waiting to see what's best. I'd love to call StopTech tomorrow and find out if they have any more info. Also, has anyone used Adam's brakes? They have a really nice looking setup, custom options, and about $2500 for pads/rotors/lines... Haven't heard of anyone that has picked it up to try.
__________________
Jon
2010 Silverstone Metallic X5 ///M |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|