Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #11  
Old 09-12-2016, 09:59 AM
Ricky Bobby's Avatar
Member
 
Join Date: Dec 2011
Location: Wake Forest, NC
Posts: 9,344
Ricky Bobby will become famous soon enough
Quote:
Originally Posted by motordavid View Post
Our doors have been 'slammed' only a few times, in 15 years of this X, and not by 'us'...

I like my driver window down or cracked, if it is nice out vs A/C.
Just odd, or maybe it was 'just time' for 3 of the 4 of them to go kaboom in past year.

I am getting my local Waynesville Indie to do the R&R tomorrow, as he is quick, skilled and doesn't charge too much. All I have is 'some time' left, and I won't spend it on a window job. Almost wish I had him order the pass side reg and do them both, as I know that last of four regs is gonna go in the next 20 mins or 20 days/weeks.

I still don't get why these are so susceptible vs all the cars I have had over the decades.
GL, mD

mD - sorry to hear the window reg worries, glad you got an indy that would take care of it for you at a reasonable cost, its not a terribly hard job, but just tedious.

IMO, there are 2 failure points on the regulators, yes the pulleys can fail and cables can stretch etc, but these are more rare.

Its the black plastic window clips which we always discuss for $2 apiece, these 2 pieces of plastic take a lot of abuse from age, heat cycles, etc - but in addition, its really the plastic/pot metal "slider clips" that the cable clips into that wear to the point of failure -

If both these pieces aren't replaced preventatively or before total failure, you most likely will not need to replace your regulator - I have done both front windows with a pair of "slider clips" available from RegulatorFix.com and a pair of black "window clips" from BMW, and my regulators are still going strong up front, next year I will do the rear regulators preventatively, but they never even get rolled down to be honest, maybe once in 5 years.

Yes its a dumb design that BMW didn't update for the heavier windows from the E39, but once you see how much heavier duty the "slider clips" are from the aftermarket, you will feel better - the OE clips on the regulator are pretty flimsy.


Obviously best practice is to not shut the extremely heavy doors with the windows rolled down and unsupported in the window frame, which I have been diligent about since I've taken ownership - If I want to crack the window when parked I make sure I shut the door very gently when getting out, or just crack the moon roof instead -

My recommendation is since the door carriers tend to be a common failure point, that when you go in the door to do your window regulators preventatively (or vice versa if repairing a door handle carrier) - make sure to do the door carrier. This way you get 3 parts prone to failure fixed and hopefully don't have to pop the door panel off again any time soon.

Time will tell, but so far, so good, since my door carrier failed this year and I replaced with an aftermarket that sticks on my passenger side a couple years back, I decided 2 OE door handle carriers and to do both sets of window regulator clips while it was open. Not a fun job in the least, but not bad at all.
__________________
2018 Ram 2500 6.7L Cummins 68RFE
19k miles -Bright White/Black - Big Horn Sport - Crew Cab Short Bed
2013 X5 35D (CEO's) - Born on 5/17/2013 -
82k miles - Alpine White/Cinnamon Brown/Premium Pkg, Sport Activity/Premium Pkg and Sound/20" Style 214/Running Boards

Reply With Quote

Sponsored Links

  #12  
Old 09-12-2016, 11:32 AM
Zulu95's Avatar
Member
 
Join Date: Mar 2005
Location: Show Me
Posts: 2,634
Zulu95 is on a distinguished road
When you compare the regulators from yesteryear to those of today the most obvious thing is how light the modern regulators are to help meet government fuel economy standards. Every last bit of weight is shaved off and you are left with the junk we now use.
I was surprised to find that even Toyota has switched to these lightweight units and they have the same problems. I just wish some retro-engineering company would design an old fashioned replacement that would last forever and who cares about the weight.
__________________
Sent via Telegraph Wires using my Morse Key.
2015 X5
xDrive35i MSport
2013 X5 xDrive35i
Reply With Quote
  #13  
Old 09-12-2016, 12:32 PM
Member
 
Join Date: Apr 2014
Location: Vancouver BC
Posts: 383
white46 is on a distinguished road
For these era of BMWs, they all suffer from broken window regulators. e46, e39, e53 all of them. Major design flaws from factory.

Great choice with getting the one with lifetime warranty
Reply With Quote
  #14  
Old 04-15-2018, 12:00 PM
Member
 
Join Date: Jun 2014
Location: Omaha, NE
Posts: 1,609
cn90 is on a distinguished road
? Brand Name

- My 2006 X5 128K miles, Both FRONT windows have new clips (attached to glass) and sliding clips (attached to cable system) done in 2017. Things are working fine, but for LF regulator, once in a while when I lower/raise glass I hear a faint noise, probably pulleys are getting tired.

- So soon or later, I may need a new regulator, it is down to brand name:

1. Dorman as in this thread. As the O.P. said he usually avoids Dorman and I am the same, I usually avoid Dorman, unless someone tells me Dorman lasts more than > 5y.

Budget is not an issue, what I don't want to get into is:
a. Redo the job in 2-3y.
b. Park the car at airport, then while I am out of town, the glass goes down on its own = not fun!

2. BMW: $177, which should last some > 10y/100K.

3. VDO is made is Taiwan, about $90. VDO (and Siemens) has good name.
Does anyone have any experience with VDO?

4. Any other brand?
__________________
1998 E39 528i 5sp MT
2006 E53 X5 3.0 6sp MT
Reply With Quote
  #15  
Old 04-15-2018, 07:40 PM
Member
 
Join Date: Mar 2016
Location: Saskatchewan Canada
Posts: 2,053
80stech is on a distinguished road
I just ordered A/C Delco Pro. Their serpentine drive tensioner looks like an improvement over the original, hopefully window reg might be too!
__________________
1988 325is (purchased new) sold
2004 X5 3.0 2005 X3 2.5
2008 X5 3.0 (new to me)
Reply With Quote
  #16  
Old 04-15-2018, 09:33 PM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,818
andrewwynn will become famous soon enough
I think a lot of regulator breakage can be avoided with some powdered lube on the window edges. My driver's window goes up 60% faster And that obviously puts tremendously less stress on the window hardware. Preventive maintenance avoid breaking in the first place.


Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)
Reply With Quote
  #17  
Old 04-15-2018, 09:54 PM
Member
 
Join Date: Jun 2014
Location: Omaha, NE
Posts: 1,609
cn90 is on a distinguished road
Andrew,

Thanks for the lubing info, it makes sense. The problem is the tight fit of the rubber molding in most cars (for water tightness and to reduce wind noise) creates friction when the glass is going upward.

Anyway, I just came across a listing on ebay for the rebuild kit, which includes everything necessary:
1- Sliders x2
2- Cables
3- Pulley x1 (why 1 pulley when 4 are needed?)

Anyone has used this kit and can comment (I see a lot sold on ebay)?



---
Attached Images
 
__________________
1998 E39 528i 5sp MT
2006 E53 X5 3.0 6sp MT
Reply With Quote
  #18  
Old 04-15-2018, 11:38 PM
Member
 
Join Date: Nov 2014
Location: SF Bay Area
Posts: 1,423
oldskewel is on a distinguished road
It looks to me like that one pulley is the one directly driven by the motor. None of the idler pulleys are included.

I bought a China brand regulator that lasted 2-3 years and then had one of those green things in the photo break. Inspecting, it looked like the plastic parts were all substandard. I ended up transplanting the regulator clips from that China brand one to my original BMW one (that I had saved, and was in pretty good shape except for the failed regulator clips), reinforcing them with JBWeld, new window clips, a few more door panel clips, and it is running great.

I would guess based on price and origin that the quality of those plastic parts in the eBay kit will be comparable to the stuff in my full Chinese regulator that failed.

So I would not do it. Not worth the effort to use your skills on second-rate materials.
__________________
2001 X5 3.0i, 203k miles, AT, owned since 2014
Reply With Quote
  #19  
Old 05-20-2020, 10:28 AM
Member
 
Join Date: Jun 2014
Location: Omaha, NE
Posts: 1,609
cn90 is on a distinguished road
Six (6) months report on VDO win regulator.
Installed in Nov. 2019.

It is made in Taiwan, about $90-$100 online.
The build quality is very good.
Nice and quiet operation.

I avoid using it as much as I can lol.
When coming to work, I open my driver door
(to avoid using the win reg) to swipe my
Electronic card to open the garage door at work.

Anyway, VDO win reg is so far so good...
__________________
1998 E39 528i 5sp MT
2006 E53 X5 3.0 6sp MT
Reply With Quote
  #20  
Old 08-13-2020, 06:22 PM
Member
 
Join Date: Jun 2014
Location: Omaha, NE
Posts: 1,609
cn90 is on a distinguished road
- Another report VDO window regulator.
- Installed Nov. 2019, 9 months later still OK.
- However, I hate this job of replacing win reg so much that I minimize the its use, i.e., I avoid lowering the glass if I can.
__________________
1998 E39 528i 5sp MT
2006 E53 X5 3.0 6sp MT

Last edited by cn90; 08-13-2020 at 10:13 PM.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 04:55 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.