|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#72
06-06-2020, 12:32 PM
|
||||
|
||||
|
She's getting there and looking good!
 My buddy did a resto awhile back and got it into a magazine. He's in the same timeframe as you on his next one.. He swears it's fun... but he was a marine and well let's just leave it at that       Sent from my SM-A730F using Tapatalk
__________________
"When the Team Chief said.... You're trapped in a hole with nothing but a goat and a slinky, what do you do? Stubby said, I'm not sure but it won't end well for the goat...." ~(Overheard) Last day, Phase 3, Q Course 
|
|
#73
06-06-2020, 12:56 PM
|
||||
|
||||
|
Quote:
__________________
Digital Competition Systems The older I get... The faster I was... No Fear 
|
|
#74
06-06-2020, 01:02 PM
|
||||
|
||||
|
Quote:
Man, that's a sweet blue on that Mopar 
|
|
#75
06-06-2020, 01:22 PM
|
||||
|
||||
|
Quote:
No tuning on the carb (modified GS455 Buick Stage-1) yet. Secondaries were running about 10% rich and the air valve wasn't opening soon enough so it would run perfect on the primaries, lean out at 3600RPM, and then start running rich at 4200RPM. I'll tweak that out once in the car though. Engine started to pull again at 6000RPM so I know there's more power available lower once the mixture is right. 1970 Pontiac 350 block with 1976 WS6 high performance heads (TA 400) Intake valves 2.11" Exhaust 1.66" Cylinders chamfered for intake valve clearance 3.935" bore X 4.25" stroke 413 cu in 99.95mm x 107.95mm 6.77L for our metric friends 9.1:1 comp ratio Ross forged pistons, Eagle forged "H" rods, Eagle cast steel crank Comp XE276HR cam 224/230 lift at .050 276/282 total duration .502/.510 total lift 1.5:1 roller rocker arms Edelbrock Torker I intake and Hedmann headers Last edited by srmmmm; 06-06-2020 at 01:28 PM.
|
|
#76
06-06-2020, 02:24 PM
|
||||
|
||||
|
Quote:
__________________
Digital Competition Systems The older I get... The faster I was... No Fear
|
|
#77
06-06-2020, 02:50 PM
|
||||
|
||||
|
Quote:
Hoping to have it ready to show you at COTA. I think Tommy and the Hendrick's guys would get a kick out of it too - a little old school is always fun (and easier to work on).
|
|
#78
06-06-2020, 11:26 PM
|
||||
|
||||
|
Man I wish I got back to the land of the big PX more often! I'd love to see it in person when she's done.
Sent from my SM-A730F using Tapatalk
__________________
"When the Team Chief said.... You're trapped in a hole with nothing but a goat and a slinky, what do you do? Stubby said, I'm not sure but it won't end well for the goat...." ~(Overheard) Last day, Phase 3, Q Course
|
|
#79
06-15-2020, 04:46 AM
|
||||
|
||||
|
It's even funnier sine it says "Eat right now!"
I'm pretty sure they meant at the restaurant  Sent from my SM-A730F using Tapatalk
__________________
"When the Team Chief said.... You're trapped in a hole with nothing but a goat and a slinky, what do you do? Stubby said, I'm not sure but it won't end well for the goat...." ~(Overheard) Last day, Phase 3, Q Course
|
|
#80
06-24-2020, 08:24 AM
|
||||
|
||||
|
Not a road pic, but pretty much a normal occurrence.
Patriot launch and incoming being destroyed.   Sent from my SM-A730F using Tapatalk
__________________
"When the Team Chief said.... You're trapped in a hole with nothing but a goat and a slinky, what do you do? Stubby said, I'm not sure but it won't end well for the goat...." ~(Overheard) Last day, Phase 3, Q Course
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
|
|
Linear Mode
