|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Help with retrofitting TV Module
I sourced a TV module and wiring harness off a 2003 4.6is parts car I bought. Because I was busy just removing everything I didn't really pay attention on where it was suppose to go plus the car has whole lot of other aftermarket wiring so it was confusing to begin with. Ok, with that said, I know the TV module goes next to them BM53 radio module and the plastic bracket has the opening so I put that there. I have the wiring harness which the already has all the RCA cables attached to them but from my understanding is that this cable is supposed to be teed off the back of the MK4 DVD Drive? Then this cable is not long enough to reach from the location all the way to the DVD drive or am I wrong? There is no empty connector in TV module area either. My main goal is to get the backup camera working on the stock MK4 nav screen. This is the cable I have: I checked the pin outs and all the RCA seem correctly wired. The parts car had a backup up cam with mk4 nav as well.
__________________
2005 Imola 4.8iS |
Sponsored Links | |
|
#2
|
|||
|
|||
Bump! Help~
I'm assuming by logic that I have to extend this wiring harness as it T-connects off the MK4 DVD drive in the trunk? The TV module is now mounted next to the radio module underneath the spare tire and the wires are not long enough.
__________________
2005 Imola 4.8iS |
#3
|
||||
|
||||
Not sure if this helps but here's the top-level menu for all the TV wiring diagrams for your car....
https://www.newtis.info/tisv2/a/en/e...image-display/
__________________
Wayne 2005 BMW X5 3.0d (b 02/05) 2001 BMW F650GS Dakar (b 06/01) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|