|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#31
|
|||
|
|||
EDIT: another thing I wanted to mention. I can now tell when the car isn’t going to start. When you turn the key to position 2. The fuel pump relay clicks fast 5 or so times. Swapping it with other relays do that same thing. Even after it does this it runs as normal. (Yes I pulled fuse panel down and confirmed) if you go back to my video you can hear it as soon as I turn the key. I just mailed my DME to sia electronics for a repair and return. They said if it tests good it’s only an 89 dollar charge.
__________________
2004 X5 3.0l. Last edited by Lityjohn791; 02-11-2019 at 02:23 PM. |
Sponsored Links | |
|
#32
|
||||
|
||||
DME is the likely candidate. Depending on their repair price it can be cheaper to get a matched set: ews, DME, key.
__________________
2011 E70 N55 (me) 2012 E70 N63 (wife) |
#33
|
|||
|
|||
It’s 218. Cheapest set I found was 300. But even if you get all new stuff. How does the key work with your door? Or do you get a lock also?
__________________
2004 X5 3.0l. |
#34
|
||||
|
||||
I would probably swap key guts but you can change the lock cylinder of the door.
Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 N55 (me) 2012 E70 N63 (wife) |
#35
|
|||
|
|||
I have found that if I clear my engine adaptations in the wrong order, or clear the wrong one last, it will do crazy stuff like crank and no start, no crank, crank and run insanely bad, throw an engine failsafe, etc..
I can fix this by.... Clear all adaptations then go to adaptations list and clear the top one - try it Clear all adaptations then go to adaptations list and clear the 2nd one - try Clear all adaptations then go to adaptations list and clear the 3rd one - try I don't remember exactly because it was a long time ago.. I thought I screwed something up bad with INPA and was going to need the dealer, but then I tried clearing specific adaptations last and it fixed it. It might have something to do with clearing only the idle adaptation that screws it up.. Your cranking and no firing reminds me of screwing with INPA too much and confusing it..
__________________
06 3.0 X5 auto 103k - 95 M3 - 01 RS25 - 80 931 |
#36
|
||||
|
||||
Except the fuel pump crazy situation doesn't fit
Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 N55 (me) 2012 E70 N63 (wife) |
#37
|
|||
|
|||
I get what you are saying. But i only got inpa and pa soft to diagnose the problem. Was happening before I messed with it. I still dont understand the fuel pump at all. Still waiting to hear if ecm is good
__________________
2004 X5 3.0l. |
#38
|
||||
|
||||
Totally feels like ECM fault.
Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 N55 (me) 2012 E70 N63 (wife) |
#39
|
|||
|
|||
Considering it throws the self check codes. Hopefully it is
__________________
2004 X5 3.0l. |
#40
|
|||
|
|||
Got dme back today. They said “the connector plug was broke”. I’m not really sure what that means but it seems to be working now. On a side note does anyone know how to diag the fault 5DEC?
__________________
2004 X5 3.0l. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|