|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Yet another gearbox (maybe) problem and torque converter compatability US/EUR
BMW X5 E53, 4.4l, 2001 year, EUR version, LHD with the following VIN Number - WBAFB31000LP01783 From the 1 000 000 threads I read about the ZF 5HP24 I read and torque issues I couldn't find anything matching my issue. Long story short - my torque was refurbished some 15000 km ago because of hard kicking, cable harness replaced, oil flushed, soft updated. Afterwards the gearbox temps were still somewhat high and after a longer drive it didn't quite downshift so smoothly as it should. So I put in a B&M cooler to serve as an additional cooler. It did improve the overall work of the gearbox, temps are now ok. However, after a longer drive a noise appears more like a howl from a huge fan, its goes louder with rpm increase. This noise appears only after 15+min of driving.No slipping, no kicking, no power loss. Noise is most audible in the lower revs - 1500-300, afterwards the engine is too loud (stripped cats) When the car is cold it all runs smooth as butter. I don't have any kicking now, but this noise increased over the last 15 000 km, especially when driving uphill in the mountains. All of this leads me to believe the torque will die soon and I should get it replaced, before it kills my gearbox as well. Has someone else experienced similar issues only when car is warmed up? And for the part in question - https://www.carid.com/dacco/automati...8&url=13111841 This torque should fit theoretically. I asked the support and gave them my Vin number - they said their product is a 100% match for the US version, but can not guarantee for EU. Could someone tell if there are any differences in the ZF gearboxes/torques between US/EU markets? Any help is much appreciated. Best regards |
Sponsored Links | |
|
#2
|
|||
|
|||
Mechanically the transmission and torque converter are identical for Europe and the USA. The transmission ECUs may be different as calibrations may change between territories. Your transmission uses a SACHS WA4/W260 S-2GWK torque converter which is identified as either an F38 or an A85 (doesn’t matter which). The identical torque converter is used in the L322 Range Rover with the 4.4i M62 engine.
The 4.6iS has a different (280mm) converter. Sorry, but I can’t open the link. Phil |
#3
|
|||
|
|||
Thanks a lot for the detailed info!
Dacco® - Automatic Transmission Torque Converter 2001 BMW X5 Fits Following Model(s):4.4L Specifications: Bolt Pattern: 10.500" Converter type: Lock-up Hub Type: SlottedMounting Style: 4 pads OEM Replacement: D21, F38, F39, 157 102 Pilot Diameter: 1.257" Ring Gear Tooth Count: NoneSpline Count: 27 Stud Count: NoneThread Size: 10 mm x 1.5Weight: 41.00lbs According to these specs (taken form the website) it should match... Realoem also shows mine to be F38. Guess i'll buy it and hope for the best. Does anyone have any experience with Dacco products? Regards |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|