Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #41  
Old 06-10-2019, 11:35 PM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,817
andrewwynn will become famous soon enough
2002 bmw x5 3.0 no throttle response

I have a feeling there is an 01/02 part mismatch. Notice the part for 01 and 02 have completely different pin out for most of the connections on the throttle body.

The COLOR of the wires are the same by function.

Pin 5&3 are the motor on a 2002.

You said the DME was replaced and also the throttle body. Check the wires by color and by pinout. Also there is confusion of which is the throttle motor v throttle sensor on the wire diagram I'm not sure you have the right pins figure out. I would try to match the color and purpose to determine correct pin.
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)

Last edited by andrewwynn; 06-11-2019 at 12:06 AM.
Reply With Quote

Sponsored Links

  #42  
Old 06-10-2019, 11:51 PM
Member
 
Join Date: Nov 2018
Location: indianapolis
Posts: 46
mic2damgood is on a distinguished road
I think your right...

I bought the dme ,ews , key and ignition on eBay all together. the description is for a 2002 BMW X5 .

Can put an 2001 dme BMW in and keep the same ews and key? Or do they have to be changed together?
Reply With Quote
  #43  
Old 06-11-2019, 12:13 AM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,817
andrewwynn will become famous soon enough
Those three have to go together that's why they are sold as a matched set.

It feels like you have a 2001 throttle body on a 2002 car and look how the pinout is radically changed.

I think you can pull the pins out of the connector and rewire the throttle body connector if I'm correct but you can check the voltage on the pin 3&5 vs 4&6 before to make sure. Fortunately sending motor signal to the sensor will not likely cause a problem but I would measure the Ω across the two sensor wipers to check them before trying to run the engine.

I think you are close. Find the right wires by color and function. Trace from the throttle body to the DME


Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)
Reply With Quote
  #44  
Old 06-18-2019, 09:33 PM
Member
 
Join Date: Nov 2018
Location: indianapolis
Posts: 46
mic2damgood is on a distinguished road
So I have connected 6 wires with pin connectors and extended the pin from the connector that on the throttle body. This will allow me to move the wires to the pin on the female connector on the harness from the dme.

This was confusing when I started looking at the schematic pin numbers and it doesn't match the wire color the pin is connected to.

Since the connector is keyed and the wires can't move in the connector. I connected the wire color to the pins on the throttle body connector and didn't look at the pin numbers.

Is this the best way to do this?

I think I have a 2002 wire harness in a 2001 car...😭

I hope I explaining this well. I put some pictures up later.
Reply With Quote
  #45  
Old 06-18-2019, 10:49 PM
Member
 
Join Date: Nov 2018
Location: indianapolis
Posts: 46
mic2damgood is on a distinguished road
Picture of the setup I have install.
Attached Images
 
Reply With Quote
  #46  
Old 06-18-2019, 11:18 PM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,817
andrewwynn will become famous soon enough
I can usually pull the pins out of the connector and rearrange them. Send a close up of the actual connector.


Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)
Reply With Quote
  #47  
Old 06-21-2019, 09:15 PM
Member
 
Join Date: Nov 2018
Location: indianapolis
Posts: 46
mic2damgood is on a distinguished road
Here is the connector

at the bottom: Here is the connector to the throttle body
Attached Images
   
Reply With Quote
  #48  
Old 06-21-2019, 09:16 PM
Member
 
Join Date: Nov 2018
Location: indianapolis
Posts: 46
mic2damgood is on a distinguished road
Do u know a way to get those pin out of the connector?
Reply With Quote
  #49  
Old 06-21-2019, 09:32 PM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,817
andrewwynn will become famous soon enough
Nope. They are molded in :-( you will have to cut and splice.


Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)
Reply With Quote
  #50  
Old 07-04-2019, 05:10 PM
Member
 
Join Date: Nov 2018
Location: indianapolis
Posts: 46
mic2damgood is on a distinguished road
will pins 4&6 have voltage when the gas pedal is pressed?

her are the wire by color and function from DME to throttle connector for 2001 pinout;

pin 1 = BRN/VIO => DME (sensor signal) pin 19
pin 2 = BRN/BLU => DME (sensor signal) pin 10
pin 3 = BRN/WHT => DME (throttle positive) pin 7
pin 4 = GRY/WHT => DME (throttle signal) pin 43
pin 5 = BRN/GRY => DME (throttle ground) pin 20
pin 6 = BRN/WHT {really BRN/BLK} => DME (throttle actuator) pin 44


How do these wire connect to the throttle body connector itself? Cant really go by the numbers inside the connector? Right?
Attached Images
 
Reply With Quote
Reply

Bookmarks

Tags
bmw x5, throttle problem, throttle response

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 10:02 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.