|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Weird Vacuum Leak
|
Sponsored Links | |
|
#2
|
||||
|
||||
Weird Vacuum Leak
Use a knife to cut out old boot. The back clamp screw is inaccessible from the factory.
Super glue is the best way to patch a crack in rubber will be air tight.
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
#3
|
|||
|
|||
Put anew elbow on yesterday. Was not very difficult at all. Hardest part was getting a wrench on the clamp holding it on the throttle body. Was ready to pull the idle control valve to make some room, then I looked at it again and figured out how to finagle the wrench in. Loosened it up, popped it off and put the new one on. Put everything back together and smoke tested it again, just to make sure I hadn't missed anything. No leaks. Been running well so far.
|
#4
|
|||
|
|||
Not to be cynical but I congratulate you on finding it EZ. The first time I did mine it was EZ only to find it wasn’t all the way home and shortly worked it’s way loose. I went through just about every tool in the box getting mine done.
Sent from my iPad using Tapatalk |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|