|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
SAS 4x4 light. how do i get it to reset?
i have just replaced this tonight in my 2004 x5 3ltr petrol. i did the full lock, left to right a few times, but the 4x4 light is still on. how do i get it to calibrate etc. and disappear? thanks |
Sponsored Links | |
|
#2
|
||||
|
||||
You need to code to car I believe. Foxwell 510/520 I think can do that chore. Level 1 scanners cannot.
Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
#3
|
|||
|
|||
i had this issue before. i didn't have to replace the steering angle sensor. all it needed was calibration. i used INPA for this. if you still have the old one, you could give it a try...otherwise, you will have to have it coded as andrew said.
|
#4
|
|||
|
|||
Yes, a new SAS needs to be coded to the car.
__________________
'04 X5 3.0 5AT with 300,000+km - Black '08 535xi 6AT with 290,000+km - Titanium Silver |
#5
|
|||
|
|||
+1 The new sensor needs to be coded to the car.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|