Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-11-2019, 07:23 PM
Member
 
Join Date: Nov 2019
Location: Oregon, USA
Posts: 5
CoughinCamel is on a distinguished road
Question What to fix first?

Hey guys new to the forum and new to the x5 (well new to any bmw really). I knew it had some issues to start with and this forum helped me decide I could handle them.
I just picked up an 05 e53 4.4i with the 6sp AT about a month ago.

It came standard with the excessive camber in the rear and a bit of a funny idle. (It hovers at 600rpm but stumbles like its going to die but picks right back up.)

Its starting to do the hard shifts from 2-1 and 1-2. (Will have the fluids flushed and seals replaced soon)
Theres a whine coming from the rear as well. (Unsure of where its coming from. Hoping its the worn tire and not the diff.)

Theres a popping(?) sound coming from the front under hard acceleration from a stop but its rare. (Fearing thats splines or TC chains.)

Every so often the 4x4 triangle comes on and stays on, not the trifecta. (I just stop and go full lock both ways twice then shut it down, makes the light go away)

Under hard braking at slow speed there's a shudder(?) In the front suspension or wheels, I can't feel it in the pedal though, so I don't think it's ABS.

So the big question is what do I prioritize first. Cost isnt a big issue as I'll be doing the work myself but could only afford one big repair a month.
__________________
77 VW Rabbit D project
05 E53 X5 4.4i 6sp AT born 04/2005
Reply With Quote

Sponsored Links

  #2  
Old 11-11-2019, 08:42 PM
Emory39's Avatar
Member
 
Join Date: Nov 2014
Location: Colorado Springs CO
Posts: 698
Emory39 is on a distinguished road
Transmission first, then once in the air check for suspension issues
__________________
5G Ford Ranger Lariat 2022

E36/7 Z3 97 1.9 New project

E53 X5 4.6is 02 OFF to Bring a trailer soon
Land Rover Disco 2 03 - sold
Kawasaki Z900B 17- sold
E53 X5 3.0 5M/T 01-sold-again
E53 X5 4.4 05-the beast a 4.8tu swap. at 150k -SOLD

E83 X3 3.0-the wife's - sold
R56 Mini Cooper S 07-sold
E36 M3 97 - sold
E36 M3 98-sold
E39 528i 00-sold
E30 318i 91-sold
E36 M3 95-sold

https://www.youtube.com/channel/UCcI..._as=subscriber
Reply With Quote
  #3  
Old 11-11-2019, 09:32 PM
Member
 
Join Date: Nov 2013
Location: Chestermere AB
Posts: 265
audiophool is on a distinguished road
Do you have an OBD scanner? One with BMW code diagnostics like Foxwell 510 will pay for itself. 4x4 light may well be the SAS (steering angle sensor) on its last legs. Check what I did to fix mine: https://xoutpost.com/bmw-sav-forums/...r-fix-0-a.html


Rear camber is usually the rose joints in the lower arm. To check, you need to unload the rear spring - easy with air springs, not so easy with steel coils.


Shudder during stopping is probably the tension arm bushings.


Do you know how old the water pump, thermostat and main coolant hoses are? Usually a good idea to replace these along with the expansion tank as a preventive measure.



Get 'er up in the air and check for loose stuff. And have fun.
__________________
'04 X5 3.0 5AT with 300,000+km - Black
'08 535xi 6AT with 290,000+km - Titanium Silver
Reply With Quote
  #4  
Old 11-11-2019, 10:33 PM
Member
 
Join Date: Nov 2019
Location: Gainesville, Florida ... Go Gators
Posts: 41
myeaglescout is on a distinguished road
even though I'm old school and would much prefer the nuts and bolts of mechanics, these are so dependent on the electronics, I'd focus on getting that squared away making your first "large" repair simply buying a BMW scan tool. For starters, you have the traction issue and a "funny idle" already. Even if you have a scan tool for live data already, a dedicated BMW scan tool is going to be a must. The live data will help you see what's going on better than you'd imagine. There are sensors all over the place, and that type of scan tool takes full advantage of them where a generic one does not.
Reply With Quote
  #5  
Old 11-12-2019, 12:33 AM
Member
 
Join Date: Nov 2019
Location: Oregon, USA
Posts: 5
CoughinCamel is on a distinguished road
Quote:
Originally Posted by audiophool View Post
Do you have an OBD scanner? One with BMW code diagnostics like Foxwell 510 will pay for itself. 4x4 light may well be the SAS (steering angle sensor) on its last legs. Check what I did to fix mine: https://xoutpost.com/bmw-sav-forums/...r-fix-0-a.html


Rear camber is usually the rose joints in the lower arm. To check, you need to unload the rear spring - easy with air springs, not so easy with steel coils.


Shudder during stopping is probably the tension arm bushings.


Do you know how old the water pump, thermostat and main coolant hoses are? Usually a good idea to replace these along with the expansion tank as a preventive measure.



Get 'er up in the air and check for loose stuff. And have fun.

A bmw code scanner is top of the list of parts to pick up, thanks for the recommendation on the Foxwell.

I have the airbags but no controls for them. I have to lift the truck then apply some jack pressure to the wheel and wiggle it in and out right?

I dont know about the water pump, hoses or expansion chamber. But so far all that seems fine.

Thanks so much for the input, I love this forum just as much as VWVortex.
__________________
77 VW Rabbit D project
05 E53 X5 4.4i 6sp AT born 04/2005
Reply With Quote
  #6  
Old 11-12-2019, 12:37 AM
Member
 
Join Date: Nov 2019
Location: Oregon, USA
Posts: 5
CoughinCamel is on a distinguished road
Quote:
Originally Posted by myeaglescout View Post
even though I'm old school and would much prefer the nuts and bolts of mechanics, these are so dependent on the electronics, I'd focus on getting that squared away making your first "large" repair simply buying a BMW scan tool. For starters, you have the traction issue and a "funny idle" already. Even if you have a scan tool for live data already, a dedicated BMW scan tool is going to be a must. The live data will help you see what's going on better than you'd imagine. There are sensors all over the place, and that type of scan tool takes full advantage of them where a generic one does not.
I was raised the same way, screw adjustments and good old feeling haha but I agree, I'm going to be picking up a scan tool or maybe the INPA software. Any recommendations on obd2 to USB for bmw?

I forgot to post that the service engine soon light popped when the funny idle started which this forum says is most likely my O2 sensors are bad.

I much appreciate your input on this!
__________________
77 VW Rabbit D project
05 E53 X5 4.4i 6sp AT born 04/2005
Reply With Quote
  #7  
Old 11-12-2019, 11:52 AM
Member
 
Join Date: Nov 2013
Location: Chestermere AB
Posts: 265
audiophool is on a distinguished road
Quote:
Originally Posted by CoughinCamel View Post
A bmw code scanner is top of the list of parts to pick up, thanks for the recommendation on the Foxwell.

I have the airbags but no controls for them. I have to lift the truck then apply some jack pressure to the wheel and wiggle it in and out right?

I dont know about the water pump, hoses or expansion chamber. But so far all that seems fine.

Thanks so much for the input, I love this forum just as much as VWVortex.

I believe you can disable the airbag pump and bleed off the pressure. Once there's no tension on the spring you can move the wheel to check for looseness.


Cooling systems are fine until they're not. I'm currently doing a repair on a friend's '06 4.4i (same N62 as yours) and it cracked the cylinder head bleed pipe 'Y' joint. That one is buried under the throttle body and is just waiting to bite. I previously did the water pump and thermostat as his pump bearing was so loose it was about to come apart. This time it's getting all new hoses.


PS: you don't need INPA, but you need the Foxwell (or similar BMW-enabled OBD scanner).
__________________
'04 X5 3.0 5AT with 300,000+km - Black
'08 535xi 6AT with 290,000+km - Titanium Silver
Reply With Quote
  #8  
Old 11-12-2019, 12:06 PM
Member
 
Join Date: Nov 2019
Location: Gainesville, Florida ... Go Gators
Posts: 41
myeaglescout is on a distinguished road
I've read a lot of good stuff about the Bimmergeek pro cable as being top shelf, but I don't have one myself. Because I like the idea of carrying the scan tool around with me, I've picked up a cheap scan tool instead of having my laptop in the car all the time. If that get stolen, I'm in a World of Scat. I'm just using a generic scan tool right now to read the codes and live data when I'm tinkering, and I'm looking to get either the Foxwell 510, 520, or 530 (or an equivalent) when I get the time to sit down and make the decision. Both options have merit, you just have to decide which one you want, or get both if you have the cash and you'll have the best of both worlds.
Reply With Quote
  #9  
Old 11-12-2019, 12:06 PM
Member
 
Join Date: Nov 2019
Location: Oregon, USA
Posts: 5
CoughinCamel is on a distinguished road
Quote:
Originally Posted by audiophool View Post
I believe you can disable the airbag pump and bleed off the pressure. Once there's no tension on the spring you can move the wheel to check for looseness.


Cooling systems are fine until they're not. I'm currently doing a repair on a friend's '06 4.4i (same N62 as yours) and it cracked the cylinder head bleed pipe 'Y' joint. That one is buried under the throttle body and is just waiting to bite. I previously did the water pump and thermostat as his pump bearing was so loose it was about to come apart. This time it's getting all new hoses.


PS: you don't need INPA, but you need the Foxwell (or similar BMW-enabled OBD scanner).
Awesome I will look for some tutorials on bleeding those.

Oh man, dont scare me like that haha.
Ok so thats definitely on the list now. While I'm in that deep should I just go all the way to the timing chain tensioners?
This X5 has 132k on the clock. So I figured its time for that soon.
__________________
77 VW Rabbit D project
05 E53 X5 4.4i 6sp AT born 04/2005
Reply With Quote
  #10  
Old 11-12-2019, 01:29 PM
Member
 
Join Date: Nov 2013
Location: Chestermere AB
Posts: 265
audiophool is on a distinguished road
I can't comment on N62 timing chains or tensioners as I have no direct experience, beyond saying that I've read they're more robust than the M62 setup. Others will chime in.


Friend's 4.4i has 300,000km on the original chains FWIW.
__________________
'04 X5 3.0 5AT with 300,000+km - Black
'08 535xi 6AT with 290,000+km - Titanium Silver
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 03:03 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.