|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
2006 4.8 pasoft lcm control messages
Please help me with this: 4.8 2006 coil springs conversion I want to remove the gauge message of suspension inactive with pasoft 1.4 (soldered pins 7&8, I also tried 1&2) I opened the lcm module , coding data, check control messages, uncheck the suspension window, write. Pasoft says codig data write ok But dont works What im doing wrong ? On my 2002 4.4 was easy and fast The year is not compatible ? What is your advice Thanks in advance |
Sponsored Links | |
|
#2
|
|||
|
|||
2002 model had LCM 3. 2006 model will have LCM 4. There are different parameters and there are also relevant parameters in instrument cluster. To make it accurately it should be done with NCS removing self levelling suspension equipment code in ZCS and then coding LCM and instrument cluster.
|
#3
|
|||
|
|||
Thanks for your answer, I already bought a ncs expert (waiting the delivery).
In pasoft on my 2006 , lcm module-Coding data-light coding This works great, i can change the coding of this, |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|