Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #11  
Old 03-08-2020, 01:20 AM
aureliusmax's Avatar
Member
 
Join Date: Sep 2019
Location: abbotsford canada
Posts: 314
aureliusmax is on a distinguished road
this is weird. measuring from the blue connector terminal at the transmission ECU, I have good resistance on these solenoids
MV1 pin 38,21 30.8 ohm
MV2 pin 26,21 29.5
MV3 pin 16,21 30.2

if I'm getting codes for electrical faults, and the wiring and resistances are good down the harness to each of the solenoid valves, the likelyhood of a failing module is higer.
__________________
2003 4.6, esotril blue, over 215,000KM. Every previous owner failed to keep up the vehicle maintenance. Restoration project.
Reply With Quote

Sponsored Links

  #12  
Old 03-08-2020, 01:22 AM
upallnight's Avatar
Member
 
Join Date: Aug 2012
Location: Cook County
Posts: 7,280
upallnight is on a distinguished road
Video on a blown drum.

https://www.youtube.com/watch?v=yQxnRuA-Ako
__________________
2006 Infiniti G35
2001 BMW 3.0I E53 X5 Build date 08/2000 SOLD
Lotus Europa 1970 Destroyed by fire
Lotus Europa 1970 S2 Renault Powered
Lotus Type 52 1970 Twincam Webers Powered
PORSCHE 911 Targa 1982 The Garage Queen
Audi Avant donated to Kars for Kids
BMW 525IT Sold
Audi 4000CS Quattro Sold
Jensen Healey Lotus Powered Sold
Opel 1900 Sold
Triumph Spitfire 1971 Sold
Triumph Spitfire 1968 Sold
Plymouth "Cuda" 340 Six pack SOLD
Reply With Quote
  #13  
Old 03-08-2020, 01:24 AM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,818
andrewwynn will become famous soon enough
which I suspect is temperature dependent so the idea of a temp logger is a very good one. Clear the codes and start when cold. Drive until it faults and see what temp. Then cool the ebox with maybe a cool pack or just leaving the lid off. I've had many many cases of computers iPhones and iPads freak out when hot.
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)
Reply With Quote
  #14  
Old 03-08-2020, 01:34 AM
aureliusmax's Avatar
Member
 
Join Date: Sep 2019
Location: abbotsford canada
Posts: 314
aureliusmax is on a distinguished road
Fault memory

SGBD BNTN code Description Vehicle mileage Is currently present?
GS8602 --- 0x000001 EGS: Pressure actuator EDS 1 --- Unknown
GS8602 --- 0x000004 EGS: Pressure actuator EDS 4 --- Unknown
GS8602 --- 0x000010 EGS: Solenoid valve 1 --- Unknown
GS8602 --- 0x000011 EGS: Solenoid valve 2 --- Unknown
GS8602 --- 0x000012 EGS: Solenoid valve 3 --- Unknown
IKI --- 0x00008D IKE: EGS signal line disturbed --- Unknown

its acting like not even connected

as an experiment, i disconnected the 40 pins connector and ran test again
Fault memory

SGBD BNTN code Description Vehicle mileage Is currently present?
DSC57 --- 0x00003A DSC: No message from EGS control unit --- Unknown
GS8602 --- 0x000001 EGS: Pressure actuator EDS 1 --- Unknown
GS8602 --- 0x000004 EGS: Pressure actuator EDS 4 --- Unknown
GS8602 --- 0x000010 EGS: Solenoid valve 1 --- Unknown
GS8602 --- 0x000011 EGS: Solenoid valve 2 --- Unknown
GS8602 --- 0x000012 EGS: Solenoid valve 3 --- Unknown
IKI --- 0x00008D IKE: EGS signal line disturbed --- Unknown
IKI --- 0x0000FB IKE: No CAN identification (EGS) --- Unknown
ME72KWP1 --- 0x0000DC DME: CAN timeout, electronic transmission management (EGS/AGS) 65526 Unknown

And reconnected the 40 pin connector at the transmission controller, then checked and re connected the 16 pin connector at the transmission.
cleared and checked again for codes.

GS8602 --- 0x000001 EGS: Pressure actuator EDS 1 --- Unknown
GS8602 --- 0x000004 EGS: Pressure actuator EDS 4 --- Unknown
GS8602 --- 0x000010 EGS: Solenoid valve 1 --- Unknown
GS8602 --- 0x000011 EGS: Solenoid valve 2 --- Unknown
GS8602 --- 0x000012 EGS: Solenoid valve 3 --- Unknown
IKI --- 0x00008D IKE: EGS signal line disturbed --- Unknown

Measuring resistance of EDS 1 and 4 as per the fault codes; from the 40 pin connector at Transmission Control Module.

EDS1 pin 28,21 7.2 ohm
EDS2 7,21 6.5 ohm

and, from a step above

MV1 pin 38,21 30.8 ohm
MV2 pin 26,21 29.5
MV3 pin 16,21 30.2
__________________
2003 4.6, esotril blue, over 215,000KM. Every previous owner failed to keep up the vehicle maintenance. Restoration project.

Last edited by aureliusmax; 03-08-2020 at 01:48 AM.
Reply With Quote
  #15  
Old 03-08-2020, 02:08 AM
aureliusmax's Avatar
Member
 
Join Date: Sep 2019
Location: abbotsford canada
Posts: 314
aureliusmax is on a distinguished road
Determined from a 'RRPhil' diagram

from another forum the commonality between MV1,MV2,MV3 and EDS1,EDS4 is a power source from the TCM pin 21 which I was not getting any voltage from, as it measured at 0V. I applied a jumper wire with Battery voltage to pin 21, deleted and retested for codes, I got a new set of faults;

Fault memory

SGBD BNTN code Description Vehicle mileage Is currently present?
GS8602 --- 0x000010 EGS: Solenoid valve 1 --- Unknown
GS8602 --- 0x000053 EGS: ECU internal fault 4 (FET) --- Unknown
IKI --- 0x00008D IKE: EGS signal line disturbed --- Unknown
ME72KWP1 --- 0x0000DC DME: CAN timeout, electronic transmission management (EGS/AGS) 65526 Unknown

Removing the jumper, deleting and testing codes again;

Fault memory
SGBD BNTN code Description Vehicle mileage Is currently present?
GS8602 --- 0x000001 EGS: Pressure actuator EDS 1 --- Unknown
GS8602 --- 0x000004 EGS: Pressure actuator EDS 4 --- Unknown
GS8602 --- 0x000010 EGS: Solenoid valve 1 --- Unknown
GS8602 --- 0x000011 EGS: Solenoid valve 2 --- Unknown
GS8602 --- 0x000012 EGS: Solenoid valve 3 --- Unknown
IKI --- 0x00008D IKE: EGS signal line disturbed --- Unknown

Seems like the fault is in the transmission control module.
Now what ?
__________________
2003 4.6, esotril blue, over 215,000KM. Every previous owner failed to keep up the vehicle maintenance. Restoration project.

Last edited by aureliusmax; 03-08-2020 at 04:28 AM.
Reply With Quote
  #16  
Old 03-08-2020, 02:54 AM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,818
andrewwynn will become famous soon enough
I would take a good look at the solder joints inside the TCU.
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)
Reply With Quote
  #17  
Old 03-08-2020, 04:29 PM
aureliusmax's Avatar
Member
 
Join Date: Sep 2019
Location: abbotsford canada
Posts: 314
aureliusmax is on a distinguished road
The next day, continue, cold operation;

GS8602 --- 0x000001 EGS: Pressure actuator EDS 1 --- Unknown
GS8602 --- 0x000004 EGS: Pressure actuator EDS 4 --- Unknown
GS8602 --- 0x000010 EGS: Solenoid valve 1 --- Unknown
GS8602 --- 0x000011 EGS: Solenoid valve 2 --- Unknown
GS8602 --- 0x000012 EGS: Solenoid valve 3 --- Unknown
IKI --- 0x00008D IKE: EGS signal line disturbed --- Unknown


after delete fault mem and rescan

GS8602 --- 0x000010 EGS: Solenoid valve 1 --- Unknown
GS8602 --- 0x000012 EGS: Solenoid valve 3 --- Unknown
IKI --- 0x00008D IKE: EGS signal line disturbed --- Unknown


remove and inspect the Printed Circuit Board for the Transmission control module

Found a possible over current / shorted trace internal to the multi-layer circuit board, with some damage visible from the top side.
cleaned both sides of board with deoxidizer, brakeclean. hot-aired the connector pin solder points on the back of the board.

reinstall, clear codes, scan again
GS8602 --- 0x000010 EGS: Solenoid valve 1 --- Unknown
IKI --- 0x00008D IKE: EGS signal line disturbed --- Unknown

at this point based on my troubleshooting and what I have observed I am satisfied that the issue has been isolated to the control module having failed.




My next question to the community is;
used modules from ebay - since I have never replaced bmw modules before. can I take a used module from the 4.4 engine with 2003 year and install this, any special procedures ?

attachments;
damage/corrosion on PCB before and after cleaning
corrosion found on dme connector
Attached Images
   
__________________
2003 4.6, esotril blue, over 215,000KM. Every previous owner failed to keep up the vehicle maintenance. Restoration project.

Last edited by aureliusmax; 03-20-2020 at 06:04 AM.
Reply With Quote
  #18  
Old 03-08-2020, 05:43 PM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,818
andrewwynn will become famous soon enough
DME is paired. I don't recall the TCU needing coding but somebody hopefully will follow up. .

The damage you show is in inline with what I was prepared to see based on your errors. Can you see where there damaged trace/s go to put a jumper around them?
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)
Reply With Quote
  #19  
Old 03-08-2020, 09:10 PM
upallnight's Avatar
Member
 
Join Date: Aug 2012
Location: Cook County
Posts: 7,280
upallnight is on a distinguished road
Quote:
Originally Posted by andrewwynn View Post
DME is paired. I don't recall the TCU needing coding but somebody hopefully will follow up. .

The damage you show is in inline with what I was prepared to see based on your errors. Can you see where there damaged trace/s go to put a jumper around them?
TCU ????

The trans module is an EGS module. Why would you want to pair the Bluetooth module?
__________________
2006 Infiniti G35
2001 BMW 3.0I E53 X5 Build date 08/2000 SOLD
Lotus Europa 1970 Destroyed by fire
Lotus Europa 1970 S2 Renault Powered
Lotus Type 52 1970 Twincam Webers Powered
PORSCHE 911 Targa 1982 The Garage Queen
Audi Avant donated to Kars for Kids
BMW 525IT Sold
Audi 4000CS Quattro Sold
Jensen Healey Lotus Powered Sold
Opel 1900 Sold
Triumph Spitfire 1971 Sold
Triumph Spitfire 1968 Sold
Plymouth "Cuda" 340 Six pack SOLD
Reply With Quote
  #20  
Old 03-08-2020, 09:33 PM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,818
andrewwynn will become famous soon enough
5HP24 no 1-2-3 no change after valve body replaced



I used the generic term because I speak English. I often call the DME the ECU also.
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)

Last edited by andrewwynn; 03-08-2020 at 09:41 PM.
Reply With Quote
Reply

Bookmarks

Tags
5hp24

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 12:52 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.