Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-08-2020, 12:15 PM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,414
crystalworks is on a distinguished road
BC Racing Coilovers Review - Another EHCII System Removed

So, it pained me to remove the EHCII system from Red as I used the system a fair amount. Almost every time I drove the truck. Loved being able to go over curbs (slowly) and then lower it for washing. But with the system just starting to give me issues and seeing the many horror stories regarding the system on here I (wife pushed too) decided to switch to coilovers. There are already threads on BCR change but figured I'd add my experience with the BC Racing I-20-BR kit. There is another kit from them as well, the I-76-BR. The only difference between the two, that I can find, is the spring rate of the rear springs. The I-20 has 12k rear and the I-76 has 8k rear spring rates.

I-20-BR Specs:

9k Front and 12k Rear Spring Rates
Linear Front and Rear Springs
2 inch minimum and 3+ inches of total potential drop

What You Get:

Here's how it arrived and everything you get. It's a budget setup so not too great, but it still presents as upscale. The front left strut assembly did have a bent bracket for the brake line, but no real damage.







Installation:

Installing these on a 4 corner air setup X5 is about as easy as anything gets on this chassis. I won't go into it as we could have installed the entire setup in under 3 hours easily. Took us closer to 6 because we were carefully removing all the air lines, junctions, air tanks, valves, etc. You know, because racecar. But no really I didn't want added weight from leaving the carcass of the air system in there when it will never be added back into the truck. Not sure if this helps or hurts resale value. By the time I'm ready to find out, it either won't matter, or I won't care.



This was the worst part because aero kit problems. The aero kit makes it very difficult to remove the inner fender liner here in order to get at the air lines. This took the most time and was the most frustrating part of the whole install. Everything else was smooth.

Torque specs:

Front knuckle to strut assembly (x2/side) - 184ft/lbs
Front strut to top of chassis (x3/side) - 25ft/lbs
Front sway bar to strut assembly (x1/side) - 74ft/lbs
Rear strut to chassis (x3/side) - 20ft/lbs
Rear strut to swing arm (x1/side) - 94ft/lbs





Going to rebuild a storage setup for under the rear load floor now as with the air compressor turtle gone there is a ton of room for activities. Should be a pretty nice compartment area. You can see where I added 3 layers of sound dampening over the old rear accumulator tank holes. Will add some foam underneath at some point but I took it for a drive as is and it's fine. Also going to replace that battery preventatively. Over 4 years old now and I can always use a good spare sitting on the shelf.



Had to remove the Dinan strut bar and mounting plates so the alignment tech would have access to the adjustment plates. Final alignment is below.



For those who were wondering, will a Dinan strut bar work with the coilover setup? Well, yes and no. You will need to do some clearancing in order to get it to work. Not a lot, but a little. Took a few minutes on the CNC lathe (AKA the angle grinder) to clearance the eye for the bolt so that the adjustment knob on the coilovers wasn't interfering or getting smashed. It's a tight fit. It pained me grinding on a $1000 strut bar to clear a $1000 coilover setup... but what are you going to do? Automotive enthusiast right.



And the final result.



While adjusting stiffness and ride height I found a side benefit to the coilovers is the suspension droop is SUBSTANTIALLY reduced. Requires a much lower lift height to get the wheels off the ground.



Driving Impressions/Final Thoughts

I am comparing to factory air setup at factory ride height. The ride is much more planted while still being compliant. This is with the dampening on the front set to 13 clicks on the soft side and the rear set to 13 clicks on the hard side. I drove it through downtown to get a real test of how rough or smooth the setup would be. It's not bad at all. I would put it at slightly stiffer than the air suspension, but not uncomfortable or jarring in any way. I am very satisfied and pleased with the coilover kit. Quality is good (as long as it lasts) and adjustment is easy. I was getting a little too much suspension travel in the rear after initial install and rubbed slightly on a large speed bump so I raised the rear 1/4" and added 2 clicks stiffer dampening. Problem solved. The versatility is very nice though I doubt I will mess with it much anymore as I am happy with where it is at. Overall I'd highly recommend this setup. I'm not sure I would be as happy with the softer rear springs on the I-76 kit. After driving with the 12k rear springs I'm not sure the 8k versions would be stiff enough to handle the weight of the rear of the truck.

My Air Ride Heights (bottom of rim to bottom of fender):

Front - 27.25" (692.15mm)
Rear - 28.00" (711.2mm)

*Note: My air ride heights are lower than stock specs in TIS. Not sure why, I never did any coding or adjustments to them. Maybe a previous owner did?

Coilover Ride Heights (bottom of rim to bottom of fender):

Front - 27.00" (685.8mm)
Rear - 27.25" (692.15mm)

__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
Reply With Quote

Sponsored Links

  #2  
Old 06-08-2020, 02:40 PM
Premier Member
 
Join Date: Jul 2011
Location: La Vista, NE
Posts: 265
ajacks8 is on a distinguished road
Thanks, CW! Just the feedback I’ve been anxiously awaiting! Sounds like you are pleased to have not had option of I-76 kit after all?

Adam
Reply With Quote
  #3  
Old 06-08-2020, 07:25 PM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,414
crystalworks is on a distinguished road
Quote:
Originally Posted by ajacks8 View Post
Thanks, CW! Just the feedback I’ve been anxiously awaiting! Sounds like you are pleased to have not had option of I-76 kit after all?

Adam
Yes, seems to have worked out. Not sure the 8k rear springs would cut it. Especially as I plan to add 100lbs+ worth of audio equipment to the rear. Let me know if you have any questions and I'll answer if I can. Only have about 80 miles on the setup so far but so far so good.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
Reply With Quote
  #4  
Old 06-08-2020, 07:55 PM
Overboost's Avatar
Member
 
Join Date: Apr 2006
Location: Huntersville, NC
Posts: 3,266
Overboost is on a distinguished road
Nice to have that planted feeling? Suspension looks great but that engine bay is stunning!
Reply With Quote
  #5  
Old 06-09-2020, 10:07 AM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,414
crystalworks is on a distinguished road
Quote:
Originally Posted by Overboost View Post
Nice to have that planted feeling? Suspension looks great but that engine bay is stunning!
Very nice indeed. I took a cloverleaf at "just" over posted limit to test it and the truck stayed nice and flat whereas on air it would have started to roll.

Thanks for the bay compliment, but that's just a good lighting shot. I keep it clean, but there are others on this site who are much more vigilant at keeping a better looking engine bay than mine. Yourself included.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
Reply With Quote
  #6  
Old 06-09-2020, 02:38 PM
BabyCAP's Avatar
Member
 
Join Date: Aug 2005
Location: X5world
Posts: 118
BabyCAP is on a distinguished road
Fantastic write up I'm lowered on factory air for the looks. Might go with your setup to tighten it up. Thank you.
__________________
‹^› ‹(•¿•)› ‹^›
2006 X5 4.8is
Reply With Quote
  #7  
Old 06-10-2020, 02:27 PM
Premier Member
 
Join Date: Jul 2011
Location: La Vista, NE
Posts: 265
ajacks8 is on a distinguished road
Did you have a flat tire monitor light on with previous air ride issue? Was that possibly corrected with coilover conversion?


Sent from my iPhone using Tapatalk
Reply With Quote
  #8  
Old 06-10-2020, 02:33 PM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,414
crystalworks is on a distinguished road
No. I only had the tpms light if tire pressure was low. Although I did have it on when I forgot to plug in the new front left sensor after replacing it. Took a minute or two to realize that.

You getting any codes in your dsc system?
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
Reply With Quote
  #9  
Old 06-10-2020, 02:35 PM
Premier Member
 
Join Date: Jul 2011
Location: La Vista, NE
Posts: 265
ajacks8 is on a distinguished road
BC Racing Coilovers Review - Another EHCII System Removed

Just code 64. “Distortion plausibility”


Sent from my iPhone using Tapatalk

Last edited by ajacks8; 06-10-2020 at 02:49 PM.
Reply With Quote
  #10  
Old 06-10-2020, 04:30 PM
Member
 
Join Date: May 2018
Location: Houston TX
Posts: 189
Mouse is on a distinguished road
I'm so glad you like it. I'm getting the same system and hearing a review like this from someone who dislikes coilovers as much as you do is very comforting. I had planned on going with a KW Variant or GroundControl setup with the e30, but as much as you like these, I may sway over. Now the question is, does the e30 or e53 get it first? We're suppose to tackle one project at a time right? Hmmm....
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 10:26 PM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.