Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #81  
Old 01-09-2021, 09:45 PM
Member
 
Join Date: Jan 2013
Location: Finland
Posts: 1,376
Clavurion is on a distinguished road
Quote:
Originally Posted by Purplecty View Post
So I am attempting at fully removing the EHC from my 4.6iS which is a slightly different system, but the steps to edit the ZCS to remove s220 should be the same. I started off with only having the no communication with air suspension module after unplugging it from the car. No other module had any errors relating to the EHC. I adjusted my ZCS to remove option 220a and ZCS_SCHREIBEN the EWS and the KMBI. I then default coded each affected module with no errors. ISTA still shows the error for no communication with the air suspension still shows the EHC module in red which is a no communication status. I wonder if ISTA knows that EHC comes standard on all 4.6iS models? Dont mind the other modules in yellow that show errors as this picture was taken as soon as I reconnected my battery.
Attachment 79475
Attachment 79476
Is that ZCS in your picture the original or altered? So which bit did you change in it?
__________________
E39 530dA -02 M-Sport Messing metallic
E53 X5 3.0dA -06 Sport Stratus grey
Reply With Quote

Sponsored Links

  #82  
Old 01-09-2021, 09:46 PM
Purplecty's Avatar
Member
 
Join Date: Jan 2017
Location: Chicago NW
Posts: 849
Purplecty is on a distinguished road
Quote:
Originally Posted by Clavurion View Post
Is that ZCS in your picture the original or altered? So which bit did you change in it?
Original from the NCS pic and new on the ZCS editor. Not sure the zcs editor image is showing? Tapatalk is telling me I've exceeded my monthly image attachments. The 4th from the last digit, including the checksum was changed from B to 9 and checksum went from E to C
__________________
02 Imola on Black Dinan S2 4.6iS
00 RoyalRot on Sand/Black 740i Short Sport

Last edited by Purplecty; 01-09-2021 at 09:55 PM.
Reply With Quote
  #83  
Old 01-09-2021, 09:51 PM
Member
 
Join Date: Jan 2013
Location: Finland
Posts: 1,376
Clavurion is on a distinguished road
Quote:
Originally Posted by Purplecty View Post
Original from the NCS pic and new on the ZCS editor. Not sure the zcs editor image is showing? Tapatalk is telling me I've exceeded my monthly image attachments.
So in SA part you changed the 14th bit from B to 9, correct? If so and that is written in EWS it must be that ISTA knows that all 4.6is versions are equipped with air suspension and is showing the module in diagram tree regardless if it's missing in ZCS.
__________________
E39 530dA -02 M-Sport Messing metallic
E53 X5 3.0dA -06 Sport Stratus grey
Reply With Quote
  #84  
Old 01-09-2021, 09:53 PM
Purplecty's Avatar
Member
 
Join Date: Jan 2017
Location: Chicago NW
Posts: 849
Purplecty is on a distinguished road
Quote:
Originally Posted by Clavurion View Post
So in SA part you changed the 14th bit from B to 9, correct? If so and that is written in EWS it must be that ISTA knows that all 4.6is versions are equipped with air suspension and is showing the module in diagram tree regardless if it's missing in ZCS.
Correct! I knew it was done correct as well because when I default coded the LCM, it defaulted EHC to not aktiv. Im just going to remove all of the air suspension related fuses and call it a win...
__________________
02 Imola on Black Dinan S2 4.6iS
00 RoyalRot on Sand/Black 740i Short Sport
Reply With Quote
  #85  
Old 01-09-2021, 10:02 PM
Member
 
Join Date: Jan 2013
Location: Finland
Posts: 1,376
Clavurion is on a distinguished road
Quote:
Originally Posted by Purplecty View Post
Correct! I knew it was done correct as well because when I default coded the LCM, it defaulted EHC to not aktiv. Im just going to remove all of the air suspension related fuses and call it a win...
Sounds like a plan. The only thing that could change things is if the vehicle has been in the sleep mode after coding before you checked things with diagnostics. Sometimes the sleep mode is required before new coding is fully adapted into use in module.
__________________
E39 530dA -02 M-Sport Messing metallic
E53 X5 3.0dA -06 Sport Stratus grey
Reply With Quote
  #86  
Old 01-09-2021, 10:06 PM
Purplecty's Avatar
Member
 
Join Date: Jan 2017
Location: Chicago NW
Posts: 849
Purplecty is on a distinguished road
Quote:
Originally Posted by Clavurion View Post
Sounds like a plan. The only thing that could change things is if the vehicle has been in the sleep mode after coding before you checked things with diagnostics. Sometimes the sleep mode is required before new coding is fully adapted into use in module.
I will double check with ISTA later or tomorrow for any changes.
__________________
02 Imola on Black Dinan S2 4.6iS
00 RoyalRot on Sand/Black 740i Short Sport
Reply With Quote
  #87  
Old 01-10-2021, 03:56 PM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,414
crystalworks is on a distinguished road
Quote:
Originally Posted by Purplecty View Post
I will double check with ISTA later or tomorrow for any changes.
What did you use to change the ZCS? NCSexpert?

I'm still a relative rookie at coding but have now done a few different things with it. Did you delete the last bit and have it recalculate checksums when you changed the ZCS?

Edit: and did you remove the ECH module in the back of the truck before coding or after?
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)

Last edited by crystalworks; 01-10-2021 at 04:02 PM.
Reply With Quote
  #88  
Old 01-10-2021, 04:25 PM
Purplecty's Avatar
Member
 
Join Date: Jan 2017
Location: Chicago NW
Posts: 849
Purplecty is on a distinguished road
Quote:
Originally Posted by crystalworks View Post
What did you use to change the ZCS? NCSexpert?



I'm still a relative rookie at coding but have now done a few different things with it. Did you delete the last bit and have it recalculate checksums when you changed the ZCS?



Edit: and did you remove the ECH module in the back of the truck before coding or after?
Used NCS to change the ZCS and I believe the ZCS editor automatically calculates the checksum so I didn't choose to auto calculate it via NCS. Coding was done after the module was removed.
__________________
02 Imola on Black Dinan S2 4.6iS
00 RoyalRot on Sand/Black 740i Short Sport
Reply With Quote
  #89  
Old 01-11-2021, 01:28 PM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,414
crystalworks is on a distinguished road
Quote:
Originally Posted by Purplecty View Post
Used NCS to change the ZCS and I believe the ZCS editor automatically calculates the checksum so I didn't choose to auto calculate it via NCS. Coding was done after the module was removed.
From what I've read, so take that for what it's worth. When coding the ZCS it's best practice to input the new ZCS (whether editing FA, GM, or VN) and then delete the last number (bit) and check the box for calculate checksums.

All the "how to's" and "diy's" I've read say to do it that way. But if your Kombi, EWS, and LKM are reporting the modified ZCS I'd imagine it's fine. I believe I also coded with my module removed.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
Reply With Quote
  #90  
Old 03-07-2021, 05:48 PM
Member
 
Join Date: Mar 2012
Location: atlanta,GA
Posts: 187
bagpype is on a distinguished road
Can anyone help me? I tried changing the ZCS by deleting the code for 2 axle air suspension. I followed these instructions to load the new ZCS on the car and when I try to code the whole car it gets an error at the EHC2 module. I’m not sure why the EHC2 module is showing up at all. I’m attempting to rid myself of the self leveling error code due to the air suspension being removed from my 2004 4.8. I’m at wits end here.
__________________
2006 x5 4.4
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 09:07 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.