|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
E53 4.4i Replaced Alternator Bracket Gasket now the engine spins but wont start
Can anyone point me in the right direction to correct this issue? Thanks in advance |
Sponsored Links | |
|
#2
|
||||
|
||||
Check your alternator connections.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles) 2006 X5 4.8is Build 11/05 Maintenance/Build Log Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles) 2010 X5 35d Build 02/10 Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles) |
#3
|
||||
|
||||
Am few xo member have had same problem recently. EWS sync was the problem.
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
#4
|
|||
|
|||
Yes basically there are 2 connections at the alternator and one is the main lug and one electric wire connection and I know I got those correct. I have ISTA+ is there a way to resync using that software?
|
#5
|
||||
|
||||
Scan it with ISTA+ and see if it gives you an error on the EWS module.
How are people losing their sync on the EWS anyway? I ask because there was a member who did not plug in the harness all the way and had the same issue you are.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles) 2006 X5 4.8is Build 11/05 Maintenance/Build Log Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles) 2010 X5 35d Build 02/10 Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles) Last edited by crystalworks; 10-06-2020 at 04:03 PM. |
#6
|
||||
|
||||
Three in 2020 on xoutpost lost ews sync that I'm aware of
Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
#7
|
|||
|
|||
Make that four. It turns out that receiving your brand new Foxwell scanner and running directly out to the garage to plug it into your X eager to test EVERYTHING, without first hooking up your battery charger/supply, is a really bad idea if that same X has a more or less depleted battery from the previous days of messing around with installing a couple of oldschool amplifiers. It's bad enough having your battery voltage drop below the critical point of getting communication errors between the various modules. But when it happens while your shiny new Foxwell is busy accessing those same modules, all hell breaks loose. And amidst the multitude of resulting faults and error codes i also had: 2737 - DME: EWS 3.3 anti-tampering protection 27A4 - DME: EWS3.3 interface management engine-immobilizer It took me half a night -and a couple of INPA sessions to get the car running again.
__________________
__________________ 2007 E70 4.8i Sport 2004 E53 4.4i Sport - R.I.P. |
#8
|
||||
|
||||
I was wondering if voltage was an issue in these situations. Why I purchased a power supply for ncsexpert sessions.
Side note, what old school amps you put in Freestyler?
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles) 2006 X5 4.8is Build 11/05 Maintenance/Build Log Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles) 2010 X5 35d Build 02/10 Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles) |
#9
|
|||
|
|||
I have no doubt that low voltage in one form or another is the root cause in most of these "my-car-has-gone-batsh!t-crazy"-situations.
It would have been a neat design feature if this, for it's time, very sophisticated control & error reporting network had a automatic voltage check added to all error registrations, so the error log would read something like: Error code XXXX - Transmission is FUBAR -But wait.. Simultaneously a low voltage condition was also registered. So maybe fix whatever dodgy connection you might have or try charging your battery before replacing the transmission. Two matching Denon DCA-800's. Most who were part of the high-end car stereo craze that went down during the 80's & 90's, will know what those are.
__________________
__________________ 2007 E70 4.8i Sport 2004 E53 4.4i Sport - R.I.P. |
#10
|
||||
|
||||
When you do a full scan you will see half a dozen modules reporting insert voltage error so it's pretty easy to guess it's the actual cause. That said the ews thing is a suck-o-rama situation
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|