|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
||||
|
||||
Remove front clip and pull motor?
There is some other stuff that needs doing and I am wondering if I could pull the motor with the transmission and transfer case attached by removing the front clip and releasing the sub frame. Pretty much like XO member "Stunt" did in page 11 of the thread linked below. http://www.xoutpost.com/bmw-sav-foru...ce-all-11.html However, I don't have the luxury of a lift. The whole assembly (motor, AT, TC & sub-frame) would have to come out toward the front of the car. I can probably raise the car 8" - 10" before I start work so that there is a bit of play for the assembly to go down before coming out forward. I had the AT out before and splitting the motor from the AT is a bear (w/o a lift). I don't have enough overhead space to lift the motor upward out of the engine bay. It seems possible to take the whole unit out in one go, sub-frame, front drive axles, hubs and all by going forward. I am wondering in particular if the engine will clear the square plates on the front of the chassis coming out forward?? Any thoughts on the geometrical challenge faced here would be appreciated.
__________________
2003 4.4i black ext./black int./black headliner (kid's runabout) 2014 535d X-drive, M package, silver/black interior Sold but not forgotten: 2009 E70 35d, black ext./black int./black headliner (sold 2021) 2006 4.8iS Le Mans blue/cream int./black headliner, SOLD in 2012 sadly... Other hardware: 2015 Cayenne S (wife's new DD and definitely wroooommmmm) 2016 Tundra 1794 edition crew cab, luxo hauler 2005 Tundra crew cab, weekend hauler. Sold after 150k very happy miles. |
Sponsored Links | |
|
#2
|
|||
|
|||
Why would you pull the motor to change the chain guides and valve cover gaskets? Just remove the radiator and you'll have plenty of room to get all your work done.
|
#3
|
|||
|
|||
Monocoque chassis vehicles like the X5 don't have a front "clip" - that is a concept on ladder chassis vehicles, where the panels do not form a structural component.
Removing a "clip" involves basically all front panels - including guards, inner guards, rad support etc all as one unit. This is not possible on an X5.
__________________
Cheers, Anthony |
#4
|
||||
|
||||
Quote:
__________________
2006 Infiniti G35 2001 BMW 3.0I E53 X5 Build date 08/2000 SOLD Lotus Europa 1970 Destroyed by fire Lotus Europa 1970 S2 Renault Powered Lotus Type 52 1970 Twincam Webers Powered PORSCHE 911 Targa 1982 The Garage Queen Audi Avant donated to Kars for Kids BMW 525IT Sold Audi 4000CS Quattro Sold Jensen Healey Lotus Powered Sold Opel 1900 Sold Triumph Spitfire 1971 Sold Triumph Spitfire 1968 Sold Plymouth "Cuda" 340 Six pack SOLD |
#5
|
|||
|
|||
No idea why you would pull the engine to do either of those jobs.
The X5 has more room in front than an e39 or e38 with an m62 and no one removes the engine in those either. If you really want more space you can remove the radiator support, front fan, condenser, trans cooler, etc but that is going to require ALOT of unnecessary work and recharging your AC after the job is done. You mention doing the VC's as if its a separate job even though you have to remove them to lock the cams. Remove the cooling system and go at it.
__________________
|
#6
|
||||
|
||||
Plenty of room to work in timing chains with the radiator removed. I was even able to get a 3/4 inch impact in there to remove the crank bolt. Sent from my iPhone using Tapatalk
__________________
2003 X5 4.4 2002 530I |
#7
|
||||
|
||||
LOL... looking at that picture. Damn I am not looking forward to all the work I have to do on my X...
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles) 2006 X5 4.8is Build 11/05 Maintenance/Build Log Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles) 2010 X5 35d Build 02/10 Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles) |
#8
|
||||
|
||||
Its actually not that bad. Just have to take your time and understand how it works before you start tearing it apart. As long as you dont try and do it in a weekend you will be fine.
__________________
2003 X5 4.4 2002 530I |
#9
|
||||
|
||||
HAHA... I plan to do it over a month if I have to. Needs: VC gaskets, upper TC gaskets, maybe lower TC gaskets, alternator housing gasket, valve stem seals, doing the coolant transfer pipe and valley pan as preventative maintenance, and it needs motor mounts. I'm sure I'll find more "while I'm in there" parts to replace as well.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles) 2006 X5 4.8is Build 11/05 Maintenance/Build Log Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles) 2010 X5 35d Build 02/10 Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles) |
#10
|
||||
|
||||
Mind as well do the chain guide rails while your in there LOL! If you need timing tools or something else let me know. I should be done with them in the next couple weeks.(hopefuely)
__________________
2003 X5 4.4 2002 530I |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|