|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Another Door Lock issue
Ok so I replaced my driver door handle carrier and reassembled everything. I disconnected the battery before going to work. Got it all back together and now the key inserted and turned does nothing and the fob does not work. The central lock button works fine while inside the car. I did remove the actuator to be able to press the new carrier cable on to the ball joint. I am about to go back in to re assess my issue. Suggestions appreciated
__________________
2005 4.4i with sport package |
Sponsored Links | |
|
#2
|
||||
|
||||
Fob not work = need to sync the key (or the key has bad solder joints and needs repair)
Key not work = DLA problem; connector to door switch not seated fully etc. The post from the lock cylinder not engaging into the DLA?
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
#3
|
|||
|
|||
Quote:
The key cylinder in the door lock is known to fail (weak part breaks within a year of daily use once the keyless entry stops working - almost guaranteed), but from your description it sounds like if it failed, it did so immediately after replacing the DHC, which is not a likely coincidence.
__________________
2001 X5 3.0i, 203k miles, AT, owned since 2014 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|