Wobbly tran heat exchanger after replacing orings.

[shevin]

Originally Posted by X5chemist

Mine had the same issue after a coolant refresh.
The problem is transmission lines move causing the cooler to teeter. A temporary fix of using a large zip tie secured the lines from moving. Since the temp fix worked, I made a bracket to secure the lines better. OEM seals were used too. Install the main holding clip. Using the clutch fan spanner wrench, I was able to snap in the cooler. Secure the transmission lines after cooler installation.

Interesting, the link you posted doesn’t work for me, do you happen to have a pic

[X5chemist]

Ok, I fixed the link. I don't think I took a picture of the bracket. I think I have one of the tie wrap. I'll look on my computer.