Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #13711  
Old 07-12-2021, 01:31 AM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,414
crystalworks is on a distinguished road
Quote:
Originally Posted by andrewwynn View Post
Photos? I'm pretty sure I could fix that without welding just normal workshop tools.

Sounds like you need something like a spade bolt something that is not difficult to fabricate and stronger than an eye welded to threaded rod. Something you can. Just buy in certain sizes and easy enough to fabricate in any size.

An example spade bolt. I use them for a few different projects: one example is holding a handrail to the wall. 3/8 spade though a 3/8 ID aluminum tube. Tighten the bejesus out of it and have maybe 1800# of preload so the handrail is the stiffest you've ever seen. (this way I can get away with minimal finger smashing zones) it feels like welded metal handrail when mounted to studs.

My brother also runs a machine shop. Get me some exact sizes I'm pretty sure one way or another we can get that fixed for you.
I took some pics, will UL them tomorrow. Thank you very much for the assistance, hopefully machining a replacement won't be necessary, but may be the strongest option.

Quote:
Originally Posted by bcredliner View Post
Have had the Dinan sway bar since 2003, no problem. Are you sure there isn't a problem with a shock tower or a camber plate? Hitting big bumps shouldn't break the eye bolt in the bar.
The bump I'm speaking was large. Truck got air time on both axles. Was more of a drop off than a bump. Think construction workers repaving on a Saturday before having Sunday off... "We'll scrape this layer off... it'll be fine with a 4" drop for 24 hours in a 75mph zone without a slope down. Screw people using this offramp." And it broke the previous repair, so it wasn't as strong as it should be. Honestly, I think I bought the X5 with the bar broken back in 2015 and just didn't realize it until such time that service dictated it had to removed. Then I discovered the broken eye-bolt, had it welded, and reinstalled.

Quote:
Originally Posted by X5chemist View Post
Oh man. Now I know who's beating me to Craiglist finds.

We'll have to do a local meet up sometime.
I have a lot to learn about these X5s.
I would be one of your competition, yes.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
Reply With Quote

Sponsored Links

  #13712  
Old 07-12-2021, 12:40 PM
Member
 
Join Date: Jan 2020
Location: Houston TX
Posts: 322
Nolimite39 is on a distinguished road
I was going to tack on a reply to my last post about working on the iS but I went back 50 pages and couldn't find it. In forum time 50 pages is pre-industrial revolution (smdh).

Now the update: I did the timing guide job along with a number of other refreshes (like 6 months ago) but kept getting a P0021 after reassembly, retimed a couple times, traced every possible wire, reached out and spoke directly with Raj, a few of the original test group for the VANOS, and even wrote an email to Steve Dinan (he never replied). Finally after a whole hell of a lot of time spent NOT working on the ailing iS because the CEO said that the kitchen remodel was more important. I finally got her back opened up over the weekend and discovered that I am a DA of the highest degree. Timing is fixed. I should be back to terrorizing the communities surrounding Lake Houston shortly, erhm, well, a lot more shortly than the 6 months that the iS has been confined to the garage.
__________________
Again Daily Driven SC'd 4.6iS, whats the point of having a sweet ride if you dont use it all the time.
Reply With Quote
  #13713  
Old 07-13-2021, 01:25 AM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,818
andrewwynn will become famous soon enough
What did you do to / for your E53 today??

Quote:
Originally Posted by Nolimite39 View Post
I was going to tack on a reply to my last post about working on the iS but I went back 50 pages and couldn't find it. In forum time 50 pages is pre-industrial revolution (smdh).

Now the update: I did the timing guide job along with a number of other refreshes (like 6 months ago) but kept getting a P0021 after reassembly, retimed a couple times, traced every possible wire, reached out and spoke directly with Raj, a few of the original test group for the VANOS, and even wrote an email to Steve Dinan (he never replied). Finally after a whole hell of a lot of time spent NOT working on the ailing iS because the CEO said that the kitchen remodel was more important. I finally got her back opened up over the weekend and discovered that I am a DA of the highest degree. Timing is fixed. I should be back to terrorizing the communities surrounding Lake Houston shortly, erhm, well, a lot more shortly than the 6 months that the iS has been confined to the garage.

Each of the times I've done chain guides on M62tu I got P0021 error.

Resolved with real-time measure of the requested vs. actual cam angle which were not well matched to confirm computer didn't see the cam matching request with refurbished vanos and just redone timing with a new chain.

I wasn't sure from the read above what was the fix.

Did you do like me and hook up the timing alignment jigs symmetrically? Oops.
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)
Reply With Quote
  #13714  
Old 07-13-2021, 08:24 AM
Member
 
Join Date: Jan 2020
Location: Houston TX
Posts: 322
Nolimite39 is on a distinguished road
Quote:
Originally Posted by andrewwynn View Post
Each of the times I've done chain guides on M62tu I got P0021 error.

Resolved with real-time measure of the requested vs. actual cam angle which were not well matched to confirm computer didn't see the cam matching request with refurbished vanos and just redone timing with a new chain.

I wasn't sure from the read above what was the fix.

Did you do like me and hook up the timing alignment jigs symmetrically? Oops.
I have the GAS Master Tool Set so the timing jigs are labeled per bank so that wasn't the issue.

Here is an excerpt from my post on Bimmerforums explaining the resolution and why I didn't catch the issue the first two times I opened it up

"UPDATE: I finally carved out enough time to get her opened back up. So my last hunch was spot on. The Bank 1 Exh and Int cams were dead on and the tools slipped on dead flat (intake was turned manually until it stopped), the Bank 2 Exh and Int cams were both ~20* retarded (didn't measure the exact angle, I eyeballed it, it was enough for me). The two contributing factors it appears were:

1) When doing the timing the previous times I didn't have the chain tensioner tool as tight as I should have. I was scared to overtighten it previously because of all the warnings in the GAS and Beisan instructions. This time I almost bottomed the tensioner bolt to the tool body, the fact that the chain has had a chance to run some and rotating the engine a few times by hand while taking up the slack helped settle everything prior to timing the engine.
2) Turning the crank CCW even the slightest bit creates a big enough difference in the position of the chain and the relative position of the cams which likely made up the rest of issue. If you miss the mark when trying to set TDC DO NOT ROTATE CCW, turn the crank CW the entire 720 degrees!

Further I will state the hypothesis that the 41.93 crank degrees which coincides 20.965 cam degrees is in fact the physical limit of the VANOS. Which makes sense because for proper operation of 20* adjustment 2.5% is an acceptable added engineered tolerance. No one has ever shown more than 41.93 and 41.93 has appeared often enough to confirm that its not random."


Here's a link to the full thread if anyone is interested.
https://www.bimmerforums.com/forum/s...d-INPA-Reading
__________________
Again Daily Driven SC'd 4.6iS, whats the point of having a sweet ride if you dont use it all the time.
Reply With Quote
  #13715  
Old 07-13-2021, 02:00 PM
andrewwynn's Avatar
Member
 
Join Date: Jun 2015
Location: Racine, WI
Posts: 10,818
andrewwynn will become famous soon enough
Quote:
Originally Posted by Nolimite39 View Post
I have the GAS Master Tool Set so the timing jigs are labeled per bank so that wasn't the issue.

Here's a link to the full thread if anyone is interested.
Hell of a tale.

I used the GAS timing gear. The banks are labeled but with pins out both sides you can put them on wrong. (kind of a foolish design oversight).

I put them on in a way they were symmetrical, think eyebrows where in reality they have to not be.

I did figure it out before I put any chain guide covers back on though.
__________________
2011 E70 • N55 (me)
2012 E70 • N63 (wife)
Reply With Quote
  #13716  
Old 07-13-2021, 02:35 PM
Member
 
Join Date: Jan 2020
Location: Houston TX
Posts: 322
Nolimite39 is on a distinguished road
Yeah, kind of want to beat my head against a brick wall after all this. Master Tool Set I have has separate tools for each bank that are labeled with a single pin on one side only, and machined lip on each so it would be really difficult to mix up, I guess not impossible. I think GAS kept getting calls from confused customers so they went ahead and added the second tool.
__________________
Again Daily Driven SC'd 4.6iS, whats the point of having a sweet ride if you dont use it all the time.
Reply With Quote
  #13717  
Old 07-13-2021, 03:01 PM
bcredliner's Avatar
Premier Member
 
Join Date: Jun 2008
Location: Little Elm,Texas. (40 minutes North of Dallas)
Posts: 8,105
bcredliner is on a distinguished road
I have had the parts to change timing guides for a year or more. Many posts over the years have claimed it is not that complex and don't be concerned about tackling the job if you have the right tools. But, in the same vein there have been many posts about having problems with the project. My conclusion is, I will have somebody help me that has done it before just to be safe.
__________________
X5 4.6 2002 Black Sap, Black interior. 2013 X5M Melbourne Red, Bamboo interior
Dallas
Reply With Quote
  #13718  
Old 07-13-2021, 03:29 PM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,414
crystalworks is on a distinguished road
Quote:
Originally Posted by andrewwynn View Post
Photos? I'm pretty sure I could fix that without welding just normal workshop tools.

Sounds like you need something like a spade bolt something that is not difficult to fabricate and stronger than an eye welded to threaded rod. Something you can. Just buy in certain sizes and easy enough to fabricate in any size.
Here you go Andrew.

Name:  IMG_20210710_131346.jpg
Views: 177
Size:  361.6 KB

Name:  IMG_20210710_131358.jpg
Views: 172
Size:  566.1 KB

Name:  IMG_20210710_131333.jpg
Views: 172
Size:  570.8 KB

Then, not on the E53, but my Dad's F10. I got tired of looking at his very poorly etched screen on the odd occurrence I'm in it (brought it over recently for shimmy diagnosis and noise - warped rotor, noise TBD) and so ordered up a polishing kit from Amazon, a screen protector, and some polishing pads for the drill. Results are impressive. Going to do this to all of our OE screens now even though they aren't nearly as bad as his.

Name:  IMG_20210712_152833.jpg
Views: 156
Size:  581.9 KB

Name:  IMG_20210712_164900.jpg
Views: 192
Size:  516.7 KB
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
Reply With Quote
  #13719  
Old 07-13-2021, 03:32 PM
Purplecty's Avatar
Member
 
Join Date: Jan 2017
Location: Chicago NW
Posts: 849
Purplecty is on a distinguished road
Quote:
Originally Posted by crystalworks View Post
Here you go Andrew.



Attachment 80549



Attachment 80550



Attachment 80551



Then, not on the E53, but my Dad's F10. I got tired of looking at his very poorly etched screen on the odd occurrence I'm in it (brought it over recently for shimmy diagnosis and noise - warped rotor, noise TBD) and so ordered up a polishing kit from Amazon, a screen protector, and some polishing pads for the drill. Results are impressive. Going to do this to all of our OE screens now even though they aren't nearly as bad as his.



Attachment 80552



Attachment 80553
CW, Looks brand new and amazing! Did the screeen protector come in the correct size or was cutting it to fit required?
__________________
02 Imola on Black Dinan S2 4.6iS
00 RoyalRot on Sand/Black 740i Short Sport
Reply With Quote
  #13720  
Old 07-13-2021, 03:46 PM
crystalworks's Avatar
Member
 
Join Date: Jun 2014
Location: SA, TX
Posts: 6,414
crystalworks is on a distinguished road
Quote:
Originally Posted by Purplecty View Post
CW, Looks brand new and amazing! Did the screeen protector come in the correct size or was cutting it to fit required?
Thanks. He was amazed. And grateful, a replacement screen is ~$1000 and all the used ones exhibited the same problem. Yes, the screen protector came cut to fit already. Was ordered from NuShield. Could have been a few mm bigger in all directions, but no big deal.
__________________
2005 X5 4.4i Build 04/05 Maintenance/Build Log
Nav, Pano, Sport (Purchased 06/14 w/ 109,000 miles) (Sold 8/15 w/121,000 miles)


2006 X5 4.8is Build 11/05 Maintenance/Build Log
Nav, DSP, Pano, Running Boards, OEM Tow Hitch, Cold Weather Pckg (Purchased 08/15 w/ 90,500 miles)

2010 X5 35d Build 02/10
Nav, HiFi, 6 DVD, Sports Pckg, Cold Weather Pckg, HUD, CAS, Running Boards, Leather Dash, PDC, Pano (Purchased 03/17 w/ 136,120 miles)
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 06:53 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.