|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
LinkBack | Thread Tools | Display Modes |
#1101
|
||||
|
||||
![]()
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
Sponsored Links | |
|
#1102
|
||||
|
||||
I was trying to figure out if that second number was a Trip odometer or the temperature Sent from my iPhone using Tapatalk Pro
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
#1103
|
||||
|
||||
Quote:
![]() Sent from Embassy network using Tapatalk
__________________
"When the Team Chief said.... You're trapped in a hole with nothing but a goat and a slinky, what do you do? Stubby said, I'm not sure but it won't end well for the goat...." ~(Overheard) Last day, Phase 3, Q Course |
#1104
|
|||
|
|||
I have 2 E53 X5 models. Both 2003 vintage. The red rocket 4.6is has 70K. I have the parts to: valve cover swap ( Aluminum jobs this time!,Lemforder control arms,both left and right mirrors, 2 new front speakers,
For the stick shift 3.0, I have exactly 140K. PO was really good at maintaining the X5. Have parts to : Front drive shaft boots, both Tie rods, the drivers window is stuck down, and my outside door handle is jacked up. I swapped out non heated for a set of heated front seats. It does get cold here. I have a whistle sound somewhere in the intake system. Every once in a while I get a left and right bank lean condition light. I bought all the parts to do an intake-ectomy. Now that I have tried a 3.0 engine, that is my preference for X5 engines. Sadly, BMW has never built a reliable V8 engine. IMHO.
__________________
2003 4.6is X5 2003 525it 2003 E53 X5 Standard shift |
#1105
|
|||
|
|||
Quote:
|
#1106
|
|||
|
|||
+1 for the smoke test. You can get smoke machines that aren't too expensive. Allows you to take your time and find leaks methodically rather than use the parts cannon (or spraying carb cleaner all over the place while the engine is running).
|
#1107
|
||||
|
||||
Every three-point oh I worked on, I needed to fix the seal on the dis valv every three-point all I worked on, I needed to fix the seal on the disa valve. rather than source, the crazy gasket I just used fast tape Teflon tape.
__________________
2011 E70 • N55 (me) 2012 E70 • N63 (wife) |
![]() |
Bookmarks |
Tags |
mileage, service, transmission |
Thread Tools | |
Display Modes | |
|
|
|