Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #21  
Old 03-24-2013, 09:06 PM
RuhRoh's Avatar
Member
 
Join Date: Mar 2013
Location: Union, KY
Posts: 53
RuhRoh is on a distinguished road
Quote:
Originally Posted by TerminatorX5 View Post
replacement/additional key - dealer item. the key needs to match to the car, in order to unlock/lock the car, arm/disarm the car, and start the engine - three separate system systems working i unison to make this all happen...
What about aftermarket companies that sell the blanks with a virgin keyless remote? Can those be programmed to match the car following the steps I've seen in the forum? I'm assuming I can find a local locksmith that can cut the key from my original. Haven't looked yet.
__________________
2001 E53
Build Date 10/2000
4.4 sport package
Topaz Blue/Tan
150k on the clock and crossing my fingers
Grom USB Interface
Reply With Quote

Sponsored Links

  #22  
Old 03-24-2013, 09:46 PM
TerminatorX5's Avatar
Member
 
Join Date: Jul 2006
Location: Stafford, VA & Harrisburg, PA - USA
Posts: 5,736
TerminatorX5 is on a distinguished road
you can get the blank that can be programmed to open the car, even to arm it but will not start the engine - there are unfortunate cases when original keys lose synchronization with the car, and that key is bricked, and will NEVER start the engine... it is done for the protection, to prevent some unscrupoluos locksmiths supply crooks with the keys to your BMW, based off the VIN that is visible on your dash... you will need to prove ownership to the dealer before a key is cut...
Reply With Quote
  #23  
Old 03-25-2013, 01:05 PM
RuhRoh's Avatar
Member
 
Join Date: Mar 2013
Location: Union, KY
Posts: 53
RuhRoh is on a distinguished road
Thanks Terminator for the reply. I'll head to the dealer to see about another key.
__________________
2001 E53
Build Date 10/2000
4.4 sport package
Topaz Blue/Tan
150k on the clock and crossing my fingers
Grom USB Interface
Reply With Quote
  #24  
Old 03-25-2013, 01:08 PM
RuhRoh's Avatar
Member
 
Join Date: Mar 2013
Location: Union, KY
Posts: 53
RuhRoh is on a distinguished road
I did some searching here and seems that I may have answered my own question about the oil in the spark plug holes. Seems that I'm in need of VC gaskets. So here is another question for those more experienced with the 4.4 - what else should I replace once I get it torn down? Valley pan gasket? PS lines? Coolant lines? Waterpump (not leaking from what I can see)

Thanks again for the help everyone.
__________________
2001 E53
Build Date 10/2000
4.4 sport package
Topaz Blue/Tan
150k on the clock and crossing my fingers
Grom USB Interface
Reply With Quote
  #25  
Old 03-25-2013, 01:15 PM
amacman's Avatar
Member
 
Join Date: May 2008
Location: glasgow,scotland
Posts: 1,462
amacman is on a distinguished road
Have a very close look at the timing chain guides when you have the cam covers off.
You said it had new chains in your first post and that now seems doubtful given the cam covers are leaking .
__________________
Artificial intelligence is no match for real stupidity
Reply With Quote
  #26  
Old 03-25-2013, 01:28 PM
RuhRoh's Avatar
Member
 
Join Date: Mar 2013
Location: Union, KY
Posts: 53
RuhRoh is on a distinguished road
Quote:
Originally Posted by amacman View Post
Have a very close look at the timing chain guides when you have the cam covers off.
You said it had new chains in your first post and that now seems doubtful given the cam covers are leaking .
Yeah - I think the PO was blowing smoke up my skirt .....

Is it likely the VC gaskets are shot wiht the amount of oil i have around the plugs? So I've looked at some of the DIY's on the VC and valley pan - where are the guides? Are they visible once i have the covers off? I haven't searched for a post on those yet. Thanks for the help.
__________________
2001 E53
Build Date 10/2000
4.4 sport package
Topaz Blue/Tan
150k on the clock and crossing my fingers
Grom USB Interface
Reply With Quote
  #27  
Old 03-25-2013, 01:34 PM
amacman's Avatar
Member
 
Join Date: May 2008
Location: glasgow,scotland
Posts: 1,462
amacman is on a distinguished road
Here is a link to e38.org . there are a few write ups on it . You will find more on xoutpost and bimmerboard and the like .
DIY: Timing Chain Guide & Timing Chain Replacement

Big job and big bucks I`m afraid .
Good luck
__________________
Artificial intelligence is no match for real stupidity
Reply With Quote
  #28  
Old 03-25-2013, 01:54 PM
bcredliner's Avatar
Premier Member
 
Join Date: Jun 2008
Location: Little Elm,Texas. (40 minutes North of Dallas)
Posts: 8,105
bcredliner is on a distinguished road
While the PS hoses degrade over time I don't know of a time limit or number of miles when replacement is recommended. PS hoses are accessible when engine is fully assembled. Unless they are leaking, I would likely leave them alone.

I coolant hoses are more accessible with the work you are planning. I would replace them.

As for the VP gasket. To me it would depend if it appeared to be leaking or not and how far you end up going with disassembly. If you are going to tackle the the timing chain work, it would be prudent to to replace the the VP gasket.
__________________
X5 4.6 2002 Black Sap, Black interior. 2013 X5M Melbourne Red, Bamboo interior
Dallas
Reply With Quote
  #29  
Old 03-25-2013, 01:55 PM
RuhRoh's Avatar
Member
 
Join Date: Mar 2013
Location: Union, KY
Posts: 53
RuhRoh is on a distinguished road
Quote:
Originally Posted by amacman View Post

Big job and big bucks I`m afraid .
Good luck
You weren't kidding - I think that's too deep for me to do as DIY. Looks like that guy had the car on a lift which would make it easier plus specialty tools. Can I see the condition of the guides when I have the vc's off? Maybe a trip to the indy before i tear into it to check it out is in order - get his opinion.

Thanks again.
__________________
2001 E53
Build Date 10/2000
4.4 sport package
Topaz Blue/Tan
150k on the clock and crossing my fingers
Grom USB Interface
Reply With Quote
  #30  
Old 03-25-2013, 02:00 PM
RuhRoh's Avatar
Member
 
Join Date: Mar 2013
Location: Union, KY
Posts: 53
RuhRoh is on a distinguished road
Quote:
Originally Posted by bcredliner View Post
While the PS hoses degrade over time I don't know of a time limit or number of miles when replacement is recommended. PS hoses are accessible when engine is fully assembled. Unless they are leaking, I would likely leave them alone.

I coolant hoses are more accessible with the work you are planning. I would replace them.

As for the VP gasket. To me it would depend if it appeared to be leaking or not and how far you end up going with disassembly. If you are going to tackle the the timing chain work, it would be prudent to to replace the the VP gasket.
If I'm only going for the VC gaskets - is it recommended to do the VP gasket as well? The PS lines are leaking a bit but that may be from loose clamps and fittings. I was going to replace the bmw clamps with worm style clamps to see if I can get a tighter closure.
__________________
2001 E53
Build Date 10/2000
4.4 sport package
Topaz Blue/Tan
150k on the clock and crossing my fingers
Grom USB Interface
Reply With Quote
Reply

Bookmarks

Tags
coolant leak, leaks, oil leak

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 10:20 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.