Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E53) Forum
Arnott
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #11  
Old 01-06-2016, 12:19 AM
N S N S is offline
Member
 
Join Date: Jan 2009
Location: Bay Area
Posts: 430
N S is on a distinguished road
Having same issue, thought it was the halos, it's either the driver side bulb or ballast.

Flickering occurs more during cornering, any reason to believe bulb over ballast based on that?
__________________
Installed! e53 OEM trailer hitch and wiring harness. No longer for sale
Reply With Quote

Sponsored Links

  #12  
Old 01-06-2016, 12:59 AM
N S N S is offline
Member
 
Join Date: Jan 2009
Location: Bay Area
Posts: 430
N S is on a distinguished road
Any recommendations on bulbs.

How are these

Amazon.com: D2S - Osram Xenarc 66240CBI HID Bulbs: Automotive
__________________
Installed! e53 OEM trailer hitch and wiring harness. No longer for sale
Reply With Quote
  #13  
Old 01-06-2016, 10:50 AM
Ricky Bobby's Avatar
Member
 
Join Date: Dec 2011
Location: Wake Forest, NC
Posts: 9,344
Ricky Bobby will become famous soon enough
CBI's are amazing bulbs, 5K bulb color temp but no loss of lumens compared to a 4300K bulb.

However I would be wary of Amazon for Philips/Osram bulbs. Stick to HIDbulbsRus | Home as he is 100% guaranteed for genuine bulbs, or Headlights, Car Lights, Headlight Bulb, Car Bulbs, Car Light Bulbs | PowerBulbs as well.
__________________
2018 Ram 2500 6.7L Cummins 68RFE
19k miles -Bright White/Black - Big Horn Sport - Crew Cab Short Bed
2013 X5 35D (CEO's) - Born on 5/17/2013 -
82k miles - Alpine White/Cinnamon Brown/Premium Pkg, Sport Activity/Premium Pkg and Sound/20" Style 214/Running Boards

Reply With Quote
  #14  
Old 01-08-2016, 07:58 AM
Member
 
Join Date: Apr 2005
Location: England
Posts: 96
Moments is on a distinguished road
Quote:
Originally Posted by ArmyX5 View Post
I am having this problem with my driver side headlight. As soon as I turn the headlights on, it will start flickering. I am not getting any error codes and I already switched the bulbs. I need to swap the ballast. I know this is an old thread, but I am hoping that these guys found the cause of the problem.
I've got similar headlamp problems which started with the low beam warning. Offside headlamp would start but went off after a couple of minutes. I swapped igniters, and the problem stayed with the offside light. Swapped bulbs, and it stayed. Checked the physical condition of the LCM - water ingress can be a problem for the connectors - all good. Scanned for errors, took a log, then removed bumper and swapped the ballasts. The problem moved to the other side, so I've had a replacement ballast shipped (from a Mercedes dealer, as it was the cheapest route and these Hella ballasts are generic). Will fit in the next day or two and post some pictures.
Reply With Quote
  #15  
Old 01-08-2016, 09:31 AM
ArmyX5's Avatar
Member
 
Join Date: Oct 2009
Location: Dayton, OH
Posts: 303
ArmyX5 is on a distinguished road
^ Thanks for the reply. I am now more convinced that my issue is a ballast going bad. I am experiencing the same problems and did the same troubleshooting as you did. The only thing that I have not done yet is the switching of the ballast because it requires the remover of the bumper. I am performing that task today.
__________________
2010 X6 50i
2005 X5 3.Oi, Many Options

2015 HONDA CR-V EX-L
1998 ACURA 2.5TL


MODs
- Driver's outside mirror light
- Voice Recognition Module
- Blaupunkt Entertainment System
with Digital TV
Reply With Quote
  #16  
Old 01-08-2016, 10:22 AM
Member
 
Join Date: Apr 2005
Location: England
Posts: 96
Moments is on a distinguished road
Apologies in advance for the volume of this post

So I took almost all of the bumper fittings out and removed the nearside headlight again to replace the ballast. I left the two 8mm screws in on the offside - there's enough flex in the bumper to not have to fight the plastic fittings at each side of the car.
There aren't a lot of pictures that I could find so here is the story starting with the location of the ballast:

Name:  ballast_location.jpg
Views: 2649
Size:  407.1 KB

I never found a good picture of the inside of the lamp unit, showing the igniter. So here's my attempt! To get the igniter out, release the wire from the side opposite the black cable, and that retaining wire allows the black cable - which seems highly unconvincing as a connection, it feels awfully loose - to fall free. Once done, rotate the igniter a few degrees like you are unscrewing it and out it pops. (The bulb has a pair of wire retainers that need unclipping if you want to take it out as well).

Name:  inside_xenon_facelift.jpg
Views: 2373
Size:  468.1 KB

Where the headlamp used to be shows the cooling slot for the ballast. Presumably it's also a water/salt intake too:

Name:  cooling_slot_xenon_ballast.jpg
Views: 1734
Size:  377.9 KB

The new ballast is a generic Hella part number 5DV 008 290, bought from a Mercedes stockist in the UK for £70 (US$102 at today's rate). It seems slightly healthier in appearance than the ten year old predecessor:

Name:  new_and_old_hella_ballasts.jpg
Views: 2401
Size:  460.6 KB

The new ballast fixed the problem with the headlamps. So I wanted to take a closer look at the failure mode. As only one of the T9 case screws came out easily, it was time to unleash the angle grinder to take the heads off the other three and prise the case open - which took some effort. The failure mode is self-evident:

Name:  old_ballast_opened.jpg
Views: 3455
Size:  705.0 KB

Now this, in my mind, is to some degree a classic BMW problem of mixed metals - the Aluminium/Aluminum (delete as applicable) ballast case and the steel retaining screws will encourage corrosion. Add in some salt and moisture, from UK winters, and this will corrode enough to produce salt that will press through the red seal inside the case. That corrosion has in this case spread to the circuit board which is bonded (presumably for thermal reasons) onto the bottom of the ballast case, and it has bridged across enough to influence the performance of edge components, this is the worst affected:

Name:  old_ballast_damage.jpg
Views: 2574
Size:  446.7 KB

I'm pretty impressed that this ballast even worked, albeit for a couple of minutes at a time!

Job done - thanks for your patience and apologies again for the heavy imagery in this response.
Reply With Quote
  #17  
Old 01-08-2016, 08:59 PM
ArmyX5's Avatar
Member
 
Join Date: Oct 2009
Location: Dayton, OH
Posts: 303
ArmyX5 is on a distinguished road
Hey Moments,

Did you have to reset the LCI after replacing the ballast? I replaced mine and it worked at first and now the low bean bulb is out. I put the old one back and it didn't came back on. I replaced a ballast before and it did the same thing. It was a long time ago and I believe that I disconnected the battery in order for the LCI to reset it self.
__________________
2010 X6 50i
2005 X5 3.Oi, Many Options

2015 HONDA CR-V EX-L
1998 ACURA 2.5TL


MODs
- Driver's outside mirror light
- Voice Recognition Module
- Blaupunkt Entertainment System
with Digital TV
Reply With Quote
  #18  
Old 01-09-2016, 06:38 AM
Member
 
Join Date: Apr 2005
Location: England
Posts: 96
Moments is on a distinguished road
I didn't need to reset anything - the check control error cleared down and I left the lights on with a battery charger connected while putting everything back together. I'll scan the LCM later today and clear down the shadow codes, I'm assuming all is well.

There is a TSB on this which is all I can add right now:
====================
SI B 63 07 05
Lights
April 2006
Technical Service

This Service Information bulletin supersedes S.I. B63 07 05 dated November 2005.

[NEW] designates changes to this revision

SUBJECT
Headlight(s) are Inoperative After Parts Replacement or Coding

MODEL
E46 (3 Series) with SA 522 (Xenon lights)
E53 (X5) with SA 522 (Xenon lights)
[NEW] E83 (X3) with SA522 (Xenon lights)
[NEW] E85 (Z4) with SA522 (Xenon lights)

SITUATION
After replacing a headlight(s) assembly, Lamp Module (LCM), Lamp Switch Center (LSZ), Stepper Motor Controller (SMC), Active Headlight Control (AHL) or coding the LCM/LSZ the headlight is inoperative.

CAUSE
The System has not been initialized.

PROCEDURE
The headlight has to have a calibration sweep in order for the LCM/LSZ to recognize it.

Use the following procedure to calibrate the headlights:
^ Select - Control Module Function Screen
^ Select - Active Headlight Control (AHL)
^ Select - Activate Components
^ Select - Reference run with senior
^ Select - Control module reset

WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
====================
This looks to me to be forcibly 'reminding' the LCM of the state it should be in.
Reply With Quote
Reply

Bookmarks

Tags
flicker, headlights, hid, low beam, low-beam

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 05:09 PM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.