|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Intermediate lever date stamp?
1. Within the date-range of "bad" ones 2. Have been replaced already. I don't see a date code anywhere? Is it possible they have been replaced with the improved type? Look for the intermediate lever production date (stamped on the lever, next to the smaller roller contacting the eccentric shaft). If the production date is in the range between "04 180" and "04 324" (e.g. day 324 of the year 2004), then the whole set of intermediate levers (16) has to be replaced. The same classification of levers must be used when ordering the intermediate levers (classification number is stamped below production date). There are 5 classifications of levers used in the N62 engine. Sent from my iPhone using Tapatalk
__________________
Garrett Fell 2014 Honda Pilot - The *new* wife mobile 2005 BMW X5 - 4.4i - It's mine now! 2003 Honda CRV - My train car 1959 VW Beetle - My toy (13.18 @ 100.86 in the 1/4) |
Sponsored Links | |
|
#2
|
|||
|
|||
Been looking all over for a picture of these date stamps. From the description of where it should be located - I'd think it'd be here. Has anyone "seen" one of these date stamps before?
Sent from my iPhone using Tapatalk
__________________
Garrett Fell 2014 Honda Pilot - The *new* wife mobile 2005 BMW X5 - 4.4i - It's mine now! 2003 Honda CRV - My train car 1959 VW Beetle - My toy (13.18 @ 100.86 in the 1/4) |
#3
|
|||
|
|||
I'm in the same boat, while doing the vss took the lever out and there is no date stamped on them per the SIB. Nor the "class" number. Is BMW dicking around? Lol
__________________
2005 Imola 4.8iS |
#4
|
|||
|
|||
Ok I found it. It's not a engraving but literally like an ink stamp so if it's dirty and covered in oil it's easy to miss it. Shine a light to it by the smaller roller and it's on there.
Definitely hard to see or can't see with out removing it. Too late for me as my guy who was doing my vss didn't know either and later we were looking at another engine he had apart and I found it. Sent from my iPhone using Tapatalk Pro
__________________
2005 Imola 4.8iS |
#5
|
||||
|
||||
Quote:
__________________
'05 E53 X5 4.4i, '97 E39 528, '07 E92 335i, '16 F86 X6M. |
#6
|
|||
|
|||
I saw it here:
It's like an etching or some kind of stamp like you see on Craftsmen high visibility sockets. It could easily be worn of with wear. Sent from my iPhone using Tapatalk Pro
__________________
2005 Imola 4.8iS |
#7
|
||||
|
||||
Holy cow, yes found it! Right underneath the intermediate lever below the smaller roller! No wonder it's hard to find it right away. Thank you! They're 07 057 - day 57 of the year 2007 (February 26, 2007). The vehicle is 2005 4.4, so they were definitely changed. Bought it CPO in 2008.
__________________
'05 E53 X5 4.4i, '97 E39 528, '07 E92 335i, '16 F86 X6M. Last edited by X5only; 12-04-2018 at 08:39 PM. |
#8
|
|||
|
|||
Intermediate lever date stamp?
Nice! You're lucky. I really wish I could of checked mine when it was all in there.
The 3 is the class. Sent from my iPhone using Tapatalk Pro
__________________
2005 Imola 4.8iS |
#9
|
|||
|
|||
Mine are 04 141 Class 6 before the date range. What does that mean??
__________________
2004 4.8iS Check out the BMW CCA X Chapter on Facebook - https://www.facebook.com/groups/603822583674050/ |
#10
|
||||
|
||||
141st day of 2004
They are using the julian date Sent from my SM-A730F using Tapatalk
__________________
"When the Team Chief said.... You're trapped in a hole with nothing but a goat and a slinky, what do you do? Stubby said, I'm not sure but it won't end well for the goat...." ~(Overheard) Last day, Phase 3, Q Course |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|