Hey guys total nightmare last night tried installing a video interface on my 2008 BMW X5 no OEM navigation or OEM camera on a 6.5" screen. long story short the video module instructed to splice into the can hi and can low wire , after splicing and connecting everything back my ccc screen never turned on again I can hear the radio but the ccc won't light up I tried aiming a flashlight to see if the LCD light was dead but you cannot see anything , I have a feeling my amature installed damaged the can hi and can low wires as he cut and spliced into them , I have since removed everything and had to solder the can low wire together as of now I don't have any codes everything seems to work except my ccc
does anyone have any ideas?! Do I need a new main harness since the plug that connects to the ccc has been damaged .
I have attached a link PDF file of the instruction manual for the video interface
https://car-solutions.com/nfs/produc...guide_ver4.pdf
If anyone can chime in please do it scared of the worse problems that may have caused this and I'm having total regret
Also this is how my wires looked after
https://car-solutions.com/nfs/menu/8...bmw-x5-e70.pdf
Super sad Guys please help !