Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > BMW SAV Forums > X5 (E70) Forum
Fluid Motor Union
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-16-2012, 07:40 PM
Member
 
Join Date: Sep 2011
Location: Virginia Beach, VA
Posts: 14
DarkMesa8 is on a distinguished road
Just fixed my dead Parking Brake Actuator.

When my parking brake actuator broke a few months ago, I swore I'd tear it apart first before shelling out $1000 for a new one.

So, I've finally had some real time and got it out of the 2008 X5 4.8i, cracked it open, and viola! The ground spade for the motor had separated from the motor!!!

Did the electrical repair, and tested it directly on the car battery, and it worked! Got it reinstalled, pressed the brake button to reset, and the yellow light went away.

I had all tools and expendables in the garage. $1000 saved!

So if you're mechanically inclined, consider taking a look inside of it first.
Reply With Quote

Sponsored Links

  #2  
Old 05-17-2012, 09:05 AM
Member
 
Join Date: May 2010
Location: on the edge of existence
Posts: 1,384
blue dragon will become famous soon enough
^^ Good job! I love reading stories like this. Too many people on here are wallet mechanics.
__________________


| '17 F15 X5 35D - Work horse | '17 F48 X1 MSport Daughter's daily | '22 Tesla MY LR Wife's Daily | '09 E70 X5 35D - Out to pasture |
Reply With Quote
  #3  
Old 05-17-2012, 10:07 AM
Member
 
Join Date: Oct 2007
Location: USA
Posts: 1,984
Penguin is on a distinguished road
Quote:
Originally Posted by DarkMesa8 View Post
So, I've finally had some real time and got it out of the 2008 X5 4.8i, cracked it open, and viola! The ground spade for the motor had separated from the motor!!!
Amazing that BMW doesn't use better quality suppliers for such important components. I guess low-bid rules.
Reply With Quote
  #4  
Old 05-17-2012, 10:39 AM
Member
 
Join Date: Dec 2011
Location: Cali
Posts: 69
m3the01 is on a distinguished road
Can u give some details concerning removal, etc?

Kinda a brief DIY, helps tons of people out.

Literally, hundreds would use ur post in the coming years.

cheers,
__________________
'12 35D AW-CINN
www.playabonita.ca -- wifes bathing suit company -- pretty girls...
Reply With Quote
  #5  
Old 05-17-2012, 05:40 PM
Member
 
Join Date: Sep 2011
Location: Virginia Beach, VA
Posts: 14
DarkMesa8 is on a distinguished road
Yeah, I hope I can get the time go do a detailed writeup. I had TIS to guide me through it, honestly without that I may have never gotten the cables disconnected from the actuator (I was able to leave the bowden cables in which I'm sure saved a ton of time).

I'll get a nutshell walkthrough of its removal and reinstallation ASAP.
Reply With Quote
  #6  
Old 05-17-2012, 07:17 PM
Member
 
Join Date: Dec 2010
Location: ny
Posts: 646
jeremym is on a distinguished road
Much appreciated!
Reply With Quote
  #7  
Old 05-22-2012, 12:33 PM
Member
 
Join Date: Dec 2011
Location: Cali
Posts: 69
m3the01 is on a distinguished road
Really appreciate u taking the time,
__________________
'12 35D AW-CINN
www.playabonita.ca -- wifes bathing suit company -- pretty girls...
Reply With Quote
  #8  
Old 05-22-2012, 04:31 PM
Member
 
Join Date: Sep 2011
Location: Virginia Beach, VA
Posts: 14
DarkMesa8 is on a distinguished road
OK, here's the nutshell. No pics, they're in the TIS and I was bookin it during changeout.

-At the release cable in the hatch (use your owners manual to find it), use a screwdriver or similar to press in the detents, inside and out, than push the cable down into its little hole.

-Underneath the car, on the same side of the vehicle, you will see the cable coming out between the bumper panel, and the plasticky undercarriage panel. Unbolt the two closest bolts to where the cable comes out and you can pull the plasticky undercarriage panel out just a little bit to pull the cable all the way. You'll know its the brake release cable, because it runs to the actuator which is mounted under the X5, behind the axles. If you need pics of it, google it and there are many diagrams for it (asking $1000 for the module).

-Pull the cable from its mounts. This doesn't require tools, just pull them.

-Now, its time for at the unit. Disconnect the electrical connection (easier said than done, get a flashlight to see exactly where you need to manipulate the clip, its not very natural). Than, undo the bolts holding the unit to the frame, or whatever it was bolted onto. This will let it free hang, but it needs to free hang if you want to disconnect the Bowden cables without removing them.

-Now that the unit is hanging, use either a crescent wrench, or your brute strength to unscrew the plastic covers where each of the bowden cables goes into the actuator. The reason you want the unit to hang, is because on the driver's side, the release cable is in the way making getting to it with a wrench extremely difficult (well, getting the wrench on is easy, but having enough clearance to turn it is almost impossible). With the unit free hanging, you can twist the unit, and pull it away from interference so you can use a wrench. However, if you can bare hand those plastic caps, good on you!

-When the caps are loose, its about to get a little more interesting: For the drivers side cable, its screwed into the worm gear. There is a small square piece (you'll have to be there to understand) which you turn clockwise to release from the unit. Yes, that's opposite of normal, and I learned this the hard way. It may seem like you're turning it forever, and you will hear the cable turning in its sheath. But if you turn it as if you're tightening, it will untighten and release.

-Now that the driver's side is release, move on to the passenger cable. This will be much easier now, since you can pull the cable almost all the way out of the unit now that the driver's side is released. Note that if you had to manually release it already, the order that its performed won't matter. On the passenger side, you will see a white plastic sleeve no more than a half inch long. Use a screw driver to undo this clip and slide it away from the actuator. This white clip is holding the cable onto its part of the worm gear. Once its moved back, the cable easily slides off in an "upward" direction, that is, if the actuator were mounted, the cable would slide up towards the stars to come off. Again, the white plastic sleeve clip has to be unclipped and pushed away first.

-With both cables removed, the release cable loose, and electrically disconnected, maneuver the actuator out of the car. Note, its mounting bracket is still attached, but I was easily able to slide it out in the passenger side direction. TAKE NOTE OF HOW THAT RELEASE CABLE WAS ROUTED TO THE BUMPER!

-------And that's all for the moment.... will continue in a little bit.

Last edited by DarkMesa8; 05-22-2012 at 04:48 PM.
Reply With Quote
  #9  
Old 11-13-2012, 08:38 PM
Noodle555's Avatar
Member
 
Join Date: Mar 2007
Location: Vancouver, BC
Posts: 206
Noodle555 is on a distinguished road
Great write up by darkmesa8. Thanks! Thought I would add to this post with my experience.

Removing, opening the actuator/control unit and reassembly took around 4 hours. Probably took me a little longer as I was working on my back and trying to figure some things out on the fly.

I think my vehicle represented more of a challenge as it has the active dampening and air bags in the rear. there is very little room to work with and actually sliding the unit out after all cables and electrical were removed was very difficult.

The electrical connector is a levered connector. just take a screwdriver and move the lever back and the connector pops right off.

Be very careful when removing the white clip on the passenger side Bowden cable is it is quite fragile and I managed to break the clip from one side. There are two tabs on the white clip that need to be lifted slightly to be able to slide the white clip back which releases the cable. Getting the clip off and on is a serious pain with the limited space.

The control unit takes some muscle to pry apart after removing the torx 25 screws. Just start at one side and keep working around.

When reassembling the driver side bowden cable you may notice the square screw just keeps turning anticlockwise and doesn't catch. I found that if you take a plier that has the grip which locks you can pull the cable out of the emergency release cable a bit and lock it with the cable out. This basically drags the actuator part out so that you can screw the right side back in easily. The screwing action has to be done by hand and takes forever!

Unfortunately for me I did not see any lose wires and the connector showed no evidence of any burnt pins so after all that I am no further ahead

No other tips but feel free to PM me if I can assist. Some pics
Attached Images
File Type: pdf Binder1.pdf (775.4 KB, 3887 views)
__________________
2008 X5 4.8i BSM/Blk - premium, sports with 20" 214s, navigation, rear climate, adaptive ride, dark bamboo, running boards, 3rd row seats, USB audio, high speed maximum, etc etc

Mods: Smoked reflectors | Hoen xenon match fogs and angel eyes | LED plate bulbs | 18" winter wheels

Other vehicles: 2002 M3 Vert TiAG/Blk - with every option and many mods | 2009 Chevy Silverado LTZ - fully loaded

Last edited by Noodle555; 11-13-2012 at 09:08 PM.
Reply With Quote
  #10  
Old 11-17-2012, 08:43 PM
Member
 
Join Date: Sep 2011
Location: Virginia Beach, VA
Posts: 14
DarkMesa8 is on a distinguished road
Yep, definitely left some gouges while prying it apart. Definitely make sure you properly seal the unit when putting it back together, to keep moisture out. A small bead of RTV should do the trick.

PS, hasn't been exactly a "long" time, but it is still working great here.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 06:38 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.