Rear Bumper Removal from a BMW X5
Contributed by: X5world
Removing Rear Bumper You need to remove (2) T55 Torx head sockets you'll see located just above exhaust tips. Then remove (2 ea.) 8mm screws in well behind each rear wheel. With a person on each side, the bumper slides right off. Install in reverse. You'll see a bracket on each side, just be sure to line up the slots. T55 Torx is not easy to find. Check with Snap-on, Matco, Mac Tools or NAPA. |
All times are GMT -4. The time now is 09:14 AM. |
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.