|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Do I need to update my os when I change my vin?
I bricked my original naviunit due to a not so successfull os update a week ago and got my self a used one from a Z4 2007 so now everything is up and running fine again. I would like to set this "new" one to the right vin.nr and wonder because I read somewhere that an os update had to be done with a vin change. At the same page i read that this should not be the case when doing a vin coding only with navcoder/resler. Since i allready bricked one, I'm not very fond of doing a new update with my own cd's and wonder what is the case, do I need to update the os due to a vin vhange or can I do it without the os update? My car is a 2004 E83 X3 3.0i. Sorry for my bad english BRGDS, Tobbe aka zymox |
Sponsored Links | |
|
#2
|
|||
|
|||
Quote:
|
#3
|
|||
|
|||
yepp, still have it and the dvd sign is there
Thank you for answering me
What happend was that it told me it needed the os cd due to a fooling around thing with inpa ( I pressed the color screen button ) and I fed it with v32. Then it told me that the loading was on it's way and the screen went black and kept that annoying color. Not even a backlight. Tried several other versions including a verified cd and the result was the same. It takes the cd and I can hear it's moving the laser. A couple of minutes later it spits out the cd. And nothing more... I also can se that the led is both flashing and solid when doing this and it didnät effect anything else. My radio plays fine for as long as I want and I can change all settings but not see what I'm doing Now I'm totaly out of ideas and changed it for another used one but I still want to get the old one up and running. I have tried different os verisons from very early to newer versions but it does the same every time... |
#4
|
||||
|
||||
When you burn a cd make ssure it at the slowest rated speed of the blank cd, do not force a non supported speed, (like x1).
If the disc supports x8 use x8. sounds like you have crashed the firmware with a badly written cd. P.S you do not need to change the vin number they work regardless.
__________________
Sept 03, M3, Silver Grey. Retro-fits: Modded Mk4 DVD Drive, OEM Bluetooth, VR Control, Rainbow Speaker Upgrade, Sony SOT Amp, HK Sub, CCFL, Intravee II, NightMode. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|