v2.8.15 released 24 December 2009 - Get it here:

NavCoder Website

(NavCoder website available in multiple languages)

Changes:
2.8.15 24 December 2009
Merry Christmas!
Fixed some PT language errors
Fixed some LT language errors
Fixed problem where the From/To filter didn't work correctly when reading log files (was OK with live data)
Fixed problem where coding of TCU emergency number didn't clear all previous data
Fixed problem where update info wasn't being read correctly if verInfo file had >1 line
Added Catalan CA to the Setup program
Added decode of commands 0x86 and 0x87 (Aux Heater status)
Added extra debugging info to Updates routine to help find problem on LT machine
Removed some test code


2.8.8 14 December 2009
Fixed problem where TEL dialog was too small (only if user used beta 2.7.88 - .129)
Fixed RTE13 error when retrieving update file version (failed if version info was wrong)
Fixed COM port message position problem on main GUI
Fixed bug where NavCoder would read TCU identity twice
Fixed bug where NavCoder would not show TCU emergency number correctly sometimes
Fixed some FR French language errors
Fixed lots of LT language errors

2.8.0 12 December 2009
Added better Win7 and Vista support through better font use
Added Catalan language CA
Added Lithuanian language LT
Added Windows build version & language to Logfile and About dialog
Added ignition-on check to make sure user has ign on when reading / coding devices
Added decode of Diagnostic error 0xB2 "Diagnostic command not supported / Wrong command"
Added support for TCU ECE Ci04
Added download speed and remaining time indicator to downloading bargraph
Added TCU success message when successfully coded TCU
Added TCU language coding functionality
Added and verified TCU-GSM coding functionality
Added activation of activity LED in simulation mode
Added false positive checker to ibus parser
Added download speed when downloading updates
Added Verbose Debug Mode (-dd switch) to assist in debugging
Added TCU-GSM Reading (same as TCU-US at the moment)
Added decoding of 0x05 Backlight Control (for rear monitor)
Added decoding of Aux Heating LED
Added auto usage of Windows default font for correct display on XP, Vista and Win7
Added View Change History file to help menu
Added saving/restore of all windows (size + position)
Added PDC Test function
Changed (Updated) list of supported US-TCU units
Changed (Re-wrote) the ibus COM-buffer parser and fixed a bug
Changed ibus activity LED to 100ms illumination (shorter)
Changed ibus msg timeout to default 300ms
Changed idle-time-before-Tx to 10ms (was 50ms)
Changed many dialog sizes to cater for larger font in Vista / Win7
Changed Show File dialogs (Readme.txt etc) to show just file name in frame caption
Changed Ibus Message Test dialog to be resizable and to auto-size (wip)
Changed behaviour when switching languages: now changes immediately, restart no longer needed
Changed Options dialog to autosize to font size, regardless of language
Changed Options dialog Close button to OK and Cancel to be Windows consistant
Changed DebugMode behaviour: BetaVersion always has DebugMode on, but a -d switch can now turn it off
Changed email templates
Changed many language texts
Fixed bugs in many language files
Fixed bug where no error message displayed when starting with no free Com ports
Fixed bug where TEL "control Unit Type" was always in English
Fixed bug where TEL control unit type dropdown list was always in English
Fixed bug where ULF VR status was not being read with "Read ULF"
Fixed bug where ULF VR was not coded (introduced when TCU added)
Fixed bug where the not-registered nag screen showed %%
Fixed bug where NavCoder crashed when starting on machine with no internet connection
Fixed bug on Win2K systems where MsgBox Yes/No was not displayed in resource text
Fixed bug with error 35756 when no Internet connection exists


2.7.25 25 September 2009
Added "Add Comment to Log File" capability (Tools menu)
Added extra decoding of 0x3A "Recirculating air control" button on the steering wheel
Added extra decoding of 0x72 "ChkCtrl Remote Central Locking"
Added Translation of "unknown" in device selection dropdown list
Added disply of "Adr_XX" and "Cmd_XX" for unknown DIA commands
Added ASCII display of DIA data
Added new ChangeHistory.txt file and removed change history from ReadMe file
Fixed detection of LCMs with CI<14 to appear as LCM_I
Fixed LCM with CI17 from type LCM1 to LCM2
Fixed display of "ü" for IKE CCM messages (was appearing as "¦")
Fixed RunTimeError when no lng directory found
Updated all OCX files to 6.1.98.16 (OCX date 24.03.09)
Reduced size of Email body by removing "NavCoder language" text


2.7.0 18 July 2009
Added installer packager with .exe distribution file (finally!)
Modified auto-update and auto-install function to work with zip and exe files
Added AND/OR function to device filter in main ibus window
Fixed bug where primary-sub languages were being detected as primary lng only eg EN-US
Fixed spelling and updated text in many language files
Changed CDC message 00 00 to Status_Request
Updated Readme file (removed OCX references)


v2.6.68 27 June 2009
Added DRL
Added BG and EL languages
Fixed bug in Code TV preventing reading of TV coding


v2.6.60 07 June 2009
Added Scan - Vehicle ID, which displays VIN numbers from IKE, LKM and NAVE
Added disabling of Code Output Mode controls for Mk1/Mk2 (not supported by these navs)
Added disabling of phone numbers for Mk1. Mk2, Mk3 navs (not supported by these navs)
Fixed bug where Progress Dialog shows "Form1" as caption
Fixed bug where Mk2 nav was showing verification error after coding


v2.6.51 03 June 2009
Fixed Telephone dialog - I had mistakenly included a test version in the reelase version of NavCoder.


v2.6.50 02 June 2009
Added scheduled auto update feature to regularly check for updates upon startup. Interval can be
set in Tools Options dialog, default is 14 days.
Improved check for Updates routine.
Improved pasting of text from clipboard to ibus msg test (now ignores CR and LF and TAB)
Improved size of Progress Bar to show all text
Updated lots of LNG files, especially FR and NL
Corrected many formatting errors in LNG files
Fixed bug where downloading updates would crash when cancelled


v2.6.40 04 May 2009
Fixed bug where Set Distance was not properly decoded
Fixed bug where Checksum Error was appearing in the ibus log
Fixed bug where Cd changer control (00 00) was not decoded properly
Added all known language files to zip file


v2.6.30 28 March 2009
Fixed bug where NavCoder would not start on Win98 machine
Fixed bug where Online Updates would cause Runtime Error if no internet connected
Fixed bug where %% was shown in title of restart message when changing languages
Added link to elektronik-idee BMW interfaces eBay Shop in Help menu
Adjusted timestamp to show milliseconds
Adjusted ibus transmission parameters to fix problem with K1200 motorbike
Corrected LCM type detection, now using Coding Index
Corrected spelling and text in german & turkish language files
Improved Online Updates routine a lot
Improved decoding of CD changer control and status messages
Improved decoding of audio control messages
Adjusted display of clock dialog text


v2.6.10 21 February 2009
Fixed bug where CodeTV dialog was incorrectly reading identity from TEL, not TV
Fixed bug where ReadBT was hanging when reading the emergency number
Fixed bug where CodeBT was not coding the ULF name
Improved upgrade sequence from previous versions. If OCX files not found, prev
version can now still be used

v2.6.1 17 February 2009
Fixed bug where Status messages were not resetting to "Ready"
Fixed Registration bug

v2.6.0 16 February 2009
Added multi-lingual capability with many languages.
Added checking for required LNG and OCX files on startup
Added "Help - NavCoder Online" to Help menu
Added "Help - Go to Resler I-Bus Interface Website" capability
Added "Help - Contact Author" capability
Added "Help - Check for Updates" capability
Added "File - Export log file" capability. Exports as CSV file.
Added Moneybookers.com as payment method
Added Code BT to the Telephone dialog. You can code name, passkey, and emerg number
To display nicely in Excel, use custom format of "00", and left-aligned for all cells.
Fixed many small bugs and tidyed up error handling code a lot
Fixed bug where failed headlight left & right were swapped
Adjusted a lot of dialog layout to cater for multi-lingual text
Added decoding of ibus command 0x31 "Buttons" for use with K1200 motorbike
Built NavCoder website

v2.5.40 30 November 2008
Added ability to re-parse an older log file and generate a new log file with the
freshly re-parsed content (useful to me to review older log files).
Added decoding of (some) TMC data. Needs verifying
Fixed parsing of map scales (200, 500 & 1000km scales)
Fixed bug where Mk3 voice coding did not correctly detect the nav results

v2.5.32 18 November 2008
Fixed small bug where all longitudes would display as E, instead of E or W
Fixed bug where 750iL consumption was showing as 0x0A instead of mpg

v2.5.31 20 October 2008
Fixed small bug where saving of scan results to a new file didn't work.

v2.5.30 19 September 2008
Added much easier registration process, with registration reminders

v2.5.22 15 September 2008
Added "Register NavCoder now!" button to main dialog
Added decoding of msg 0x2D "Dial number"
Added decoding of msg 0xAA "Nav control"
Updated decoding of time & date (msg 0x1F) to include radio-controlled clock
Fixed bug where saving an info scan caused "run-time error 52"

v2.5.20 26 August 2008
Added scan - Service Information
Fixed bug where ProgressLog was not being closed after coding nav languages & boot mode
Fixed coding nav bug (verification was failling)
Fixed display of msg 0x23, 0x24 where control byte wasn't interpreted properly

Enjoy!