Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Navigation System (https://xoutpost.com/electronics/navigation-system/)
-   -   FM1 FM2 and FMA program station no longer work on steering control (https://xoutpost.com/electronics/navigation-system/12486-fm1-fm2-fma-program-station-no-longer-work-steering-control.html)

mrgrant 03-11-2006 11:12 AM

FM1 FM2 and FMA program station no longer work on steering control
 
After I went from sw3-1/30 to sw3-1/63 I noticed that FM1 FM2 and FMA program station no longer work on steering control for changing the program stations. I now have to change the program stations on the head unit to get my program stations (1-6). I found the control for SCAN, AUTO and M but all the does for the steering wheel control is everything but my program stations. How do I get that back?

UCrewX5 03-11-2006 11:23 AM

I don't recall that it ever worked that way. You will find that 98%+ of the people here will be at V18.2 (3-1/41) or higher, which has never worked the way you decribe.

As far as I know, once you go past V18 (which was the splitscreen release that required you have a KeyCD to do the upgrade) you can't go back to a pre V18 version.

Jeff

p.s. :xoutpost:

UCrewX5 03-11-2006 11:39 AM

Wait, are you saying that you completely lost the ability to change radio stations via steering wheel controls? Or did you lose the ability to switch between FM1, FM2 and FMA. I read your question as the latter and I don't recall ever being able to do that.

vollgasfahrer 03-11-2006 11:39 AM

You have an older BM24 Radiomodul.
You can enable or disable the feature by pressing the "sel" key for a few seconds. In the display appears "pres on" (I think that means: Preselection On) or "pres off" as confirmation.

UCrewX5 03-11-2006 11:53 AM

Quote:

Originally Posted by vollgasfahrer
You have an older BM24 Radiomodul.
You can enable or disable the feature by pressing the "sel" key for a few seconds. In the display appears "pres on" (I think that means: Preselection On) or "pres off" as confirmation.

:iagree:


Put your screen into radio mode and then press and hold down the "SELECT" button. You should see a message "PRES ON" appear. This will have now toggled your steering wheel buttons to go to your next pre-set instead of to the next channel. To go back to the way it is now, repeat the procedure and you'll see the display read "PRES OFF".

mrgrant 03-11-2006 06:44 PM

Got it to work again! However.....
 
I put the screen into radio mode and then pressed the 'SELECT' button. I pressed the 'SELECT' button until the cursor was over 'm Manual'. Then I pressed the right Nav Select button twice and it changed to '<<m>> manual'. After this change the steering wheel buttons allowed me to go to the next pre-set instead of to the next channel/station. I noticed now that the pre-set channels are no longer displayed on-screen. In ver sw3-1/31 (v17) it did. However in the mode it wasin before it went to the next channel/station but would display the channel on-screen. I am a little supprised at all the changes between versions.

Thanks for the tips.


All times are GMT -4. The time now is 03:04 AM.

vBulletin, Copyright 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
2017 Xoutpost.com. All rights reserved.