Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   X5 (E53) Forum (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/)
-   -   Double DIN Eonon GA8166 No Audio (https://xoutpost.com/bmw-sav-forums/x5-e53-forum/108805-double-din-eonon-ga8166-no-audio.html)

littlex5 09-05-2018 05:48 PM

Double DIN Eonon GA8166 No Audio
 
1 Attachment(s)
I bought a double DIN Eonon GA8166 and paid a local audio shop to install it on my 2005 E53 4.4. It was working fine for a while but one day it stopped producing audio. Everything works, just no sound. Long story short, the audio shop and Eonon have been pointing fingers at each other with no resolution. The last idea Eonon has is for me to check whether there's 12V going into the DSP. First of all, I need to know if I have a DSP. Someone told me I do have it based on the attached photo. Is there an easy way to determine if the DSP/amp is getting power? When I press the voice command button on my steering wheel, I do get speech response from the car's audio. Does that proof that my DSP/amp is working properly?

Here's Eonon's response:
"Does your car have DSP system and AMP? If it has AMP, please kindly check if the AMP control cable has stable 12V?"

Here's website for the Eonon head unit:
https://www.eonon.com/Android-Car-GP...o-Display.html

ajacks8 09-06-2018 12:42 AM

Interesting timing. I have that exact same head unit. NO issues since I got the truck in January (PO installed Eonon)...then 3 weeks ago, NO audio. NONE. I had already picked up a JL MX280/4 to replace factory amp eventually because I heard that the factory DSP amp would be problematic, at best, but was definitely considered a weak point of the system. Anyways, my installer said that the factory amp was toast when tested last week for the swap. He bypassed the amp, installed the MX280 and I got my jams back right away. My guess is your amp went bad. Only $1300 to replace with OEM. Yeah right. Good luck.

X5only 09-06-2018 02:26 PM

I have the same issue with my Dynavin N6: I loose audio every few months. Disconnecting and reconnecting the battery always fixes it. I and Jeff have gone through troubleshooting steps with no success. I got a new IBUS decoder but that did not fix it. Reconnecting the Dynavin or decoder does not help. Whenever audio is lost, I always find the IBUS decoder with a red light on it. INPA/DIS/SSS show that the DSP amp is fine. Jeff thinks that there's something wrong with the DSP amp. But I never had such issues with the factory headunit. Anyhow, I can live with the issue as it happens every 2-3 or so months, although reaching the battery is a hustle if you have to do it every so often.

littlex5 09-07-2018 08:04 PM

ajacks8 and X5only, thanks for you replies. So the fact that the voice command audio is coming through the car's speakers okay does not proof that the DSP/amp is working? Do you know if the voice command is using a different amp?

littlex5 10-15-2018 02:42 PM

The no-audio issue is temporarily solved. See this new thread...
https://xoutpost.com/bmw-sav-forums/...ml#post1144218

ajacks8 10-15-2018 03:13 PM

Mine still jams after bypass of original amp...
 
It's been almost two months with no interruption, except for two half-second audio cut-outs within the first minute of sound. They are back-to-back and even predictable at this point. I'll live. Good luck.


All times are GMT -4. The time now is 12:12 AM.

vBulletin, Copyright 2022, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
2017 Xoutpost.com. All rights reserved.