Air intake duct hardware? Help
 

I need an air intake duct (13711437101), the one that goes over the radiator.
My question is, what hardware/clips are required to mount it? Anyone have the part # for them / know how many are required?

My car has a Dinan CAI and was missing this piece when I bought it. I realize it does nothing considering the CAI, but it does give the engine bay a finished look.

Parts 15 and 14 in this is what you'll need: https://www.realoem.com/bmw/enUS/sho...diagId=13_0902

Part numbers can be found at Realoem.com.

Much appreciated

Those are common parts you can get at Auto parts store as well just need the right diameter. Removable expanding plastic rivet. Appropriately 6mm post with 15mm head (that part is a guess). I bought the OEM from fcpeuro so I could measure when I'm in the engine bay.

Yes I also found them on fcpeuro, thank you.
I also need a few misc screws for the underbelly splash shield that I’m sure are generic as well.

I think those mostly use spring nuts, so a #10 or #12 sheet metal screw or metric equivalent would work just.use stainless so they last more than a year.

Your local NAPA store has a binder with a bunch of this kind of stuff in it. Nice to see similar items next to each other.