Quote:
Originally Posted by Ghost-Flame
No. When the sensor detects a a slip it sends power to the front wheels otherwise in normal driving conditions the rear wheels are powered only.
On the jack stands the only the rear wheels will turn. Especially at idle speed you aren't going to trigger a sensor.
|
Pre x-drive (up through 2003) don't have sensors in the transfer case. In normal driving all wheels are powered.
The transfer case will work like an open differential, so if there is a slight drag on one axle the wheels on the other axle will turn (ie at idle). But as soon as the speed differential is sufficient for the DSC system to apply a wheel brake on the spinning wheel, that will change. That is when the vehicle drives off the jack stands.
It is dangerous to suggest that anyone work on an AWD vehicle with the front wheels on the ground and the rear wheels hanging, with the engine running and the transmission in gear. It is even worse to suggest that someone may get underneath that vehicle. Don't even try and justify that 'it will be fine'. It is simply a very bad practice.
__________________
2007 X3 3.0si, 6 MT, Premium, White
Retired:
2008 535i, 6 MT, M Sport, Premium, Space Grey
2003 X5 3.0 Steptronic, Premium, Titanium Silver
2002 325xi 5 MT, Steel Grey
2004 Z4 3.0 Premium, Sport, SMG, Maldives Blue
|