Quote:
Originally Posted by imalabil
.......One question - do you just force the larger OD flange of the Powerflex bushing through the tension arm hole? Every other bushing I've seen in this type of application has been split, but this is one piece. Does the flange compress enough?
.........
|
The large flange will push thru the CAB bore.
From post #3602.......
To install the Powerflex bushing, I used a 1/2 X 7" bolt/nut/washers with my 1/2 drive metric oil filter canister socket on the bushing and a 3X3 3/4" steel plate clearance drilled for the 1/2 bolt on the control arm, I installed with the greased steel sleeves inside the bushing to help guide the bushing along the bolt.