Really need some help on this issue now as pulling my hair out over this. Since my last post, I replaced both front guide mounts and also had passenger wheel adjusted to full positive camber - BUT alignment still out as it reads (-0.42) - drivers wheel is within range at -0.02......I am unable to adjust the passenger wheel camber to positive anymore.

My wishbone ball joint rubbers are showing signs of wear/tear, but as there is no play on the joints both my indy and the alignment center said these are not causing the negative camber.

This negative camber on the passenger wheel is causing my car to pull left when the steering wheel is straight.

Is there any else I should be looking at?

Please help - I want to keep my hair .