Quote:
Originally Posted by X5_Rob
With the main panel in the closed position with both panels vented open go ahead and open the sunshade all the way.. Then climb in the back seat and look at the middle of the 2nd smaller panel on either side (driver and passenger sides of the car).. You will see a single torx screw on each side.. Unscrew both of those screws .. Those screws hold the panel guide in the open or vented position. Now get out of the car and give the panel a firm push downward.. It will "pop" loose and close down.. That's it.. The entire sunroof should now be fully functional minus the ability for the 2nd panel to vent back open.. I took the time to really clean the entire sunroof area, greased the tracks and sprayed some wd-40 onto a rag and wiped down the areas that snug up to each other when opening or closing.. Mine is working great now..
|
Just wanted to say thank you for this post. A life saver. A little history: my rear panel was stuck in the up position. Took it to my indy, they closed it, left the sun shade open (at our request), and disabled the controls (so we didn't accidentally vent the shade again). $140. They quoted me $2000-$3000 to fix it, since they didn't really know much about it, and suggested I take it to the dealership or somewhere else. At least they were honest. Anyway, mid summer it was getting pretty hot in the car, and I wanted to close the sunshade, and stumbled across this post! I searched on the forum how to remove the upper console (separate thread on xoutpost), reattach the wire, remove the rear-panel screws, reprogram the sunroof (separate thread on xoutpost), and bham, fully (well, 95%) functioning sun roof again! Wife was blown away I figured this out. Don't worry, I gave credit where credit was due. Just had to spend a few minutes and say thank you.