Have been to three alignment shops. None BMW experts but all decent overall.

2005 4.8is @ 96K miles
My front right camber is uneven from left. The shops say "sorry no adjustment room left". The mystery to me is why left and right are uneven.

Left
-0.2 degree (has room for adjustment)

Right
-1.8 degree

That was prior to full suspension rebuild of front end; all new bushings and ball joints in front end, new bmw air struts/springs. All rear bushings still old/factory, new shocks in rear.

Now
Left
0.0 degree

Right
-1.0 degree


Noted I do still have the factory "pins" in the top of the shock towers. I see with the non air ride shocks Bentley says "remove pin" to further adjust. Have others had to remove this pin on air struts too?

Long term I may end up choosing to run negative camber in the front end but right now my mystery is: why is the right side still different from the left?

Wondering what parts could be bent ?

thx for any ideas
J

__________________
2003 E39 530i
1992 MX5
2005 E53 x5 4.8is (sold)
1990 K75S (sold)